Small Block Ford
-
Crank Triggers
Shop MSD crank trigger systems for precise crankshaft position sensing and ignition timing. Find complete flying-magnet and Hall-effect crank trigger kits for Chevrolet and Ford engines, plus trigger wheels, sensors, magnetic pickups, brackets, wiring harnesses, and replacement components for performance, racing, and EFI applications.
Shop Now -
Distributors
Shop MSD performance ignition distributors for street, racing, marine, and EFI applications. Explore Pro-Billet, Ready-to-Run, Dual Sync EFI, crank-trigger, cam-sync, front-drive, Street Fire, and Pro Mag systems for Chevrolet, Ford, Chrysler, Pontiac, and Oldsmobile engines, plus distributor caps, rotors, gears, conversion kits, and replacement components.
Shop Now
-
Ignition Boxes
Shop MSD performance ignition boxes for street, strip, drag racing, circle track, road racing, marine, and off-road applications. Find 6-Series, 7-Series, Street Fire, Power Grid, Pro 600, LS, Hemi, and distributorless ignition controls with multi-spark technology, rev limiting, and adjustable timing.
Shop Now -
Spark Plug Wires
Shop MSD spark plug wires for street, racing, and restoration applications. Find 8.5mm Super Conductor, Street Fire, race-tailored, universal, and vehicle-specific wire sets with low-resistance cores, heat-resistant silicone insulation, and reduced EMI for Chevy, GM LS and LT, Ford Windsor and Coyote, Mopar HEMI, and other engines.
Shop Now -
Starters
Shop MSD DynaForce high-torque and high-speed starters for performance and racing applications. Find compact gear-reduction starters with heavy-duty solenoids for high-compression, turbocharged, and supercharged engines, with direct-fit options for Chevy small- and big-block, GM LS, Ford Windsor, Ford FE, Chrysler, AMC, Oldsmobile, and Pontiac platforms.
Shop Now
SHOP BY ENGINE
-
to
MSDMSD Spark Plug Wires for Ford 302, 351W Spark Plug Wires for SBF 302-351W, Straight Multi-Angle and 90 Degree Boots, Red jacket.In Stock
MSRP $137.95$109.75Save $28.20
Best-SellerMSDFord 289/302 Ready-To-Run Distributor Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes an iron gear and a rev limiterPart# 8352Free ShippingIn Stock
MSRP $743.95$593.95Save $150.00
Best-SellerPart# 8456Free ShippingEst. Ship Date: Coming Soon
MSRP $584.95$466.95Save $118.00
MSDFord TFI EFI 351W w/Module Pro-Billet Distributor Steel gear for factory roller cam, includes modulePart# 8452Free ShippingEst. Ship Date: 01/29/2027
MSRP $701.95$560.95Save $141.00
MSDFord 289/302 Street Pro-Billet w/Steel Gear Small diameter distributor for 289/302 engines, includes steel gear and vacuum advance. Must be used with an MSD 6, 7 or 8-series ignition.Part# 84791Free ShippingIn Stock
MSRP $658.95$525.95Save $133.00
MSDFord 289/302 Billet Distributor Fits 289, 302 with steel gear for hydraulic roller cams. Must be used with an MSD 6, 7 or 8-series ignition.Part# 8598Free ShippingIn Stock
MSRP $538.95$430.95Save $108.00
Best-SellerPart# 8455Free ShippingIn Stock
MSRP $629.95$502.95Save $127.00
MSDBlack Super Conductor Ford 302, 351W, HEI For use on Ford small-block engines with 302-351W, HEI boots, Black jacket.Est. Ship Date: 12/04/2026
MSRP $186.95$149.35Save $37.60
MSDFord 302 Small Diameter Pro-Billet Distributor Great for blower or manifold clearance. Fits 289/302 engines, includes iron gear. Must be used with an MSD 6, 7 or 8-series ignition.Part# 8579Free ShippingIn Stock
MSRP $526.95$420.95Save $106.00
MSDFord 289/302 Ready-To-Run Distributor, Steel Gear Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes a steel gear and a rev limiterPart# 83521Free ShippingIn Stock
MSRP $877.95$700.95Save $177.00
MSDFord 351W Ready-To-Run Pro-Billet Distributor Steel Gear Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes an steel gear and a rev limiterPart# 83541Free ShippingIn Stock
MSRP $877.95$700.95Save $177.00
MSDSuper Conductor Spark Plug Wire Set, Ford 289-302, w/HEI Cap For use with Ford small block, 289-302 with HEI Cap, Red jacketPart# 35399Free ShippingIn Stock
MSRP $195.95$156.55Save $39.40
Best-SellerMSDFord 5.0L Black Pro-Billet Distributor Add a stealth look to your Ford 5.0L with an MSD Black Pro-Billet Distributor. This is a direct drop-in replacement for 86-93 5.0L EFI engines.Part# 84563Free ShippingEst. Ship Date: Coming Soon
MSRP $658.95$525.95Save $133.00
MSDFord Crate Ignition Kit, 289/302 This kit makes it easy to add MSD performance to your new crate engine. Supplied with a steel gear for compatibility with hydraulic roller cams.Part# 84745Free ShippingIn Stock
MSRP $1,199.95$958.95Save $241.00
MSDMSD Black Distributor, Ford 289/302, Ready-to-Run, Steel Gear MSD's Black Distributor with Small Diameter and Ready to Run w/Vacuum Advance and Steel Gear, No Ignition Box needed.Part# 835231Free ShippingEst. Ship Date: Coming Soon
MSRP $818.95$654.95Save $164.00
MSDFord 351W Ready-To-Run Pro-Billet Distributor Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes an iron gear and a rev limiterPart# 8354Free ShippingIn Stock
MSRP $743.95$593.95Save $150.00
MSDFord 351W Street Pro-Billet w/Steel Gear The Street models share the same features as the small diameter models, plus feature a vacuum advance.Part# 84781Free ShippingEst. Ship Date: 12/14/2026
MSRP $843.95$673.95Save $170.00
MSDFord 289/302 Steel Distributor Gear Replacement for carbureted Ford distributors with 0.468" ID and MSD Distributors, PN's 8582, 8579, 8479, 8352 and 8503.In Stock
MSRP $168.95$134.95Save $34.00
MSDFord 289/302 Street Pro-Billet Small diameter distributor for 289/302 engines, includes iron gear and vacuum advance. Must be used with an MSD 6, 7 or 8-series ignition.Part# 8479Free ShippingIn Stock
MSRP $658.95$525.95Save $133.00
MSDFord 351W Street Pro-Billet Small diameter distributor for 351W, includes iron gear and vacuum advance. Must be used with an MSD 6, 7 or 8-series ignition.Part# 8478Free ShippingIn Stock
MSRP $843.95$564.95Save $279.00
MSDFord 351W Sync Plug MSD's cam sync plugs install in place of a traditional distributor to drive the oil pump and provide a cam sync signal when running a Holley EFI, or other aftermarket sequential EFI system requiring a cam sync signal.Part# 85061Free ShippingIn Stock
MSRP $449.95$358.95Save $91.00
MSDFord 351W Dual Sync Distributor Pro-Billet Dual Sync EFI Distributors designed to work with Holley EFI, and other sequential EFI systems that support Hall Effect crank and cams sensor inputs.Part# 2378Free ShippingIn Stock
MSRP $701.95$560.95Save $141.00
MSDFord 351W Small Diameter Pro-Billet Distributor Small diameter distributor for 351W, includes iron gear. Must be used with an MSD 6, 7 or 8-series ignition.Part# 8578Free ShippingIn Stock
MSRP $643.95$513.95Save $130.00
MSDBlack Distributor, Ford 351W, Pro-Billet w/Steel Gear MSD's Black Small Diameter Distributor w/Black Cap and Steel Gear, requires the use of MSD 6, 7, 8 Series Ignition.Part# 857831Free ShippingIn Stock
MSRP $658.95$525.95Save $133.00
MSDMSD Distributor, Ford 351W, Billet, Small Cap, Steel Gear MSD's Pro-Billet Small Diameter Distributor w/Red Cap and Steel Gear, requires the use of MSD 6, 7, 8 Series Ignition.Part# 85786Free ShippingIn Stock
MSRP $584.95$466.95Save $118.00
MSDMSD Crank Trigger Wheel Kit - Flying Magnet - Hall Effect - SBF - Windsor 289/302/351W - 6.562 in. - Crank Trigger Wheel and Hall-Effect Crank SensorPart# 86401Free ShippingIn Stock
MSRP $701.95$560.95Save $141.00
MSDMSD DynaForce Starter - High Torque - Black - 3/4" Depth Ring Gear Small Block Ford - 289-351 Windsor - Fits Bell Housing/Engine Block Plates with 4.084" I.D. Registry HolePart# 5090Free ShippingIn Stock
MSRP $571.95$456.95Save $115.00
MSDFord 302 and 351W Steel Distributor Gear The 85834 STEEL gear is a direct replacement for the 8455 & 8456 5.0L EFI distributors, and also fits 351W distributors with 0.531" ID.Part# 85834Free ShippingEst. Ship Date: 12/08/2026
MSRP $188.95$151.15Save $37.80
MSDStreet-Fire Wire Set Ford 302, 351W, HEI The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.In Stock
MSRP $80.95$64.76Save $16.19
MSDMSD Billet Distributor - Ford - Small Block - Iron Gear Small Block Ford - 289/302 - SBF - Must Be Used With an MSD 6, 7, or 8-Series Ignition.Part# 8582Free ShippingIn Stock
MSRP $571.95$456.95Save $115.00
MSDDistributor, Ford 289/302, E-Curve, Steel Gear MSD's Pro-Billet Ready-to-Run Distributor with Electronic Advance Curves and Steel Gear, No Ignition Box needed.Part# 85031Free ShippingIn Stock
MSRP $877.95$700.95Save $177.00
MSDFord 289/302 CAM Sync Plug MSD's cam sync plugs install in place of a traditional distributor to drive the oil pump and provide a cam sync signal when running a Holley EFI, or other aftermarket sequential EFI system requiring a cam sync signal.Part# 85221Free ShippingEst. Ship Date: Coming Soon
MSRP $449.95$358.95Save $91.00
MSDFord 351W Bronze Distributor Gear MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel.In Stock
MSRP $109.95$87.20Save $22.75
MSDMSD Black, Ford 289, 302 Dual Sync Distributor Pro-Billet Dual Sync EFI Distributors with steel gear is designed to work with Holley EFI, and other sequential EFI systems that support Hall Effect crank and cams sensor inputs.Part# 23773Free ShippingIn Stock
MSRP $701.95$560.95Save $141.00
MSDFord 289 - 302 Crab Cap Distributor Low profile, magnetic pickup distributor ideal for clearing blower snouts, and for any application where height is critical.Part# 85824Free ShippingIn Stock
MSRP $760.95$607.95Save $153.00
MSDFord TFI EFI 351W No Module Pro-Billet Distributor Steel gear for factory roller cam, no module includedPart# 8451Free ShippingIn Stock
MSRP $760.95$607.95Save $153.00
MSDFord 351W Crab Cap Distributor Low profile, magnetic pickup distributor ideal for clearing blower snouts, and for any application where height is critical.Part# 85844Free ShippingIn Stock
MSRP $760.95$607.95Save $153.00
MSDMSD Black Distributor Ford 289-302, Pro Billet, Small Cap, Steel Gear MSD's Black Small Diameter Distributor w/Steel Gear, requires the use of MSD 6, 7, 8 Series Ignition.Part# 857931Free ShippingIn Stock
MSRP $571.95$456.95Save $115.00
MSDFord 351W Steel Gear Billet Distributor Fits 351W with steel gear for hydraulic roller cams. Must be used with an MSD 6, 7 or 8-series ignition.Part# 85840Free ShippingIn Stock
MSRP $658.95$525.95Save $133.00
MSDMSD Billet Distributor - Ford - Small Block V8 - Bronze Gear Small Block Ford - 289/302 - SBF - Must Be Used With an MSD 6, 7, or 8-Series IgnitionPart# 85827Free ShippingIn Stock
MSRP $631.95$503.95Save $128.00
MSDDistributor, Ford 289-302/Steel Gear/Holley Hi-Ram MSD's Pro-Billet Small Diameter Distributor w/Red Cap and Steel Gear, requires the use of MSD 6, 7, 8 Series Ignition and designed to fit Holley 289-302 Hi-Ram Carburetor Intake ManifoldsPart# 85797Free ShippingIn Stock
MSRP $618.95$493.95Save $125.00
MSDDistributor, Billet Ford 351W, for Edelbrock Victor Jr, w/Steel Gear MSD's Billet Distributor for use with Edelbrock Victor Jr. Intake manifold, w/Steel Gear. Requires the use of MSD 6, 7, 8 Series Ignition.Part# 858051Free ShippingEst. Ship Date: Coming Soon
MSRP $538.95$430.95Save $108.00
MSDFord 351W Crank Trigger Distributor Low-profile racing distributor, must be used with an MSD 6, 7 or 8-series ignition and a crank trigger.Part# 8378Free ShippingIn Stock
MSRP $631.95$503.95Save $128.00
In Stock
MSRP $56.19$44.96Save $11.23
MSDStreet-Fire Wire Set Ford 351W, 400, 460, '77-On HEI The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.In Stock
MSRP $92.95$73.76Save $19.19
MSDFord 351W Iron Distributor Gear Provides long life, an easy break-in period and reliable performance!In Stock
MSRP $56.19$44.96Save $11.23
MSDFord 302 Bronze Distributor Gear MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel.In Stock
MSRP $109.95$87.20Save $22.75
MSDStreet-Fire Spark Plug Wire Set Ford 289-302, Socket SBF Spark Plug Wires for 289-302 SBF Small Block FordIn Stock
MSRP $92.95$73.76Save $19.19
In Stock
MSRP $104.95$83.48Save $21.47
MSDPro-Billet Cam Sync Distributor, Ford 289/302, Bronze gear Dual Signal Distributor with Hall-Effect Cam Sync and Magnetic Crank pickup and includes a bronze gear. Must be used with an MSD 6, 7 or 8-series ignitionPart# 2360Free ShippingIn Stock
MSRP $1,124.95$898.95Save $226.00
MSDPro-Billet Cam Sync Distributor, Ford 351W, Steel gear Hall-Effect sync pickup and includes a steel gear. Must be used with an MSD 6, 7 or 8-series ignitionPart# 2362Free ShippingIn Stock
MSRP $956.95$763.95Save $193.00
MSDFord 289, 302 Dual Sync Distributor Pro-Billet Dual Sync EFI Distributors with steel gear is designed to work with Holley EFI, and other sequential EFI systems that support Hall Effect crank and cams sensor inputs.Part# 2377MSDFree ShippingIn Stock
MSRP $701.95$560.95Save $141.00
MSDMSD Black, Ford 351W Dual Sync Distributor Pro-Billet Dual Sync EFI Distributors designed to work with Holley EFI, and other sequential EFI systems that support Hall Effect crank and cams sensor inputs.Part# 23783Free ShippingEst. Ship Date: 12/11/2026
MSRP $701.95$560.95Save $141.00
MSDMSD DynaForce Starter - High Torque - Black - 3/4" Depth Ring Gear Small Block Ford - 289-351 Windsor - Fits Bell Housing/Engine Block Plates with 4.084" I.D. Registry HolePart# 50903Free ShippingIn Stock
MSRP $631.95$503.95Save $128.00
Part# 601523Free ShippingIn Stock
MSRP $2,362.95$1,888.95Save $474.00
Part# 601533Free ShippingIn Stock
MSRP $2,418.95$1,933.95Save $485.00
Part# 7915Free ShippingIn Stock
MSRP $2,137.95$1,708.95Save $429.00
MSDMSD Black Ford 289/302 Ready-To-Run Distributor Easy as 1,2,3… The MSD Black Ready-to-Run distributor line makes adding big ignition power and stealthy good looks to your Chevy, Ford or Chrysler a snap. With no ignition box needed, connect 3 wires and you're "Ready-To-Run".Part# 83523Free ShippingIn Stock
MSRP $956.95$763.95Save $193.00
MSDFord 289 / 302 Crank Trigger Distributor Distributor designed for race applications using MSD Crank Trigger systems.Part# 8379Free ShippingIn Stock
MSRP $538.95$430.95Save $108.00
MSDFord 289 / 302 Crank Trigger Distributor Distributor designed for race applications using MSD Crank Trigger systems.Part# 83795Free ShippingIn Stock
MSRP $538.95$430.95Save $108.00
MSDFord 351W Dual Pickup Distributor CLEARANCE ITEM / ALL SALES FINAL - For racing, must be used with an MSD 6, 7 or 8-series ignition.Part# 8384Free ShippingIn Stock
MSRP $787.95$628.95Save $159.00
Part# 8453Free ShippingEst. Ship Date: 11/30/2026
MSRP $710.95$567.95Save $143.00
MSDFord Crate Ignition Kit, 351W This kit makes it easy to add MSD performance to your new crate engine. Supplied with a steel gear for compatibility with hydraulic roller cams.Part# 84746Free ShippingIn Stock
MSRP $1,518.95$1,213.95Save $305.00
MSDFord 289, 302 E-Curve Pro-Billet Distributor Set the timing curve with a twist of a rotary dial!Part# 8503Free ShippingEst. Ship Date: Coming Soon
MSRP $1,012.95$808.95Save $204.00
MSDMSD Black Ford 351W Pro-Billet Distributor All the performance of our Pro-Billet line NOW IN BLACK for your Ford, Chevy or Chrysler. Must be used with MSD 6, 7, or 8-series ignition.Part# 85783Free ShippingIn Stock
MSRP $745.95$595.95Save $150.00
MSDDistributor, Ford 351W/Steel Gear/Holley Hi-Ram MSD's Pro-Billet Small Diameter Distributor w/Red Cap and Steel Gear, requires the use of MSD 6, 7, 8 Series Ignition and designed to fit Holley 351W Hi-Ram Carburetor Intake ManifoldsPart# 85787Free ShippingIn Stock
MSRP $658.95$525.95Save $133.00
MSDMSD Black Ford 289/302 Pro-Billet Distributor All the performance of our Pro-Billet line NOW IN BLACK for your Ford! Must be used with MSD 6, 7, or 8-series ignition.Part# 85793Free ShippingIn Stock
MSRP $658.95$525.95Save $133.00
MSDFord 351W w/Edelbrock Victor Jr Billet Distributor For use with Edelbrock Victor Jr. Intake manifold, includes iron gearPart# 85805Free ShippingIn Stock
MSRP $631.95$503.95Save $128.00
MSDFord V8 351W Billet Distributor Fits 351W with iron gear. Must be used with an MSD 6, 7 or 8-series ignition.Part# 8584Free ShippingIn Stock
MSRP $562.95$448.95Save $114.00
MSDMSD Crank Trigger Wheel Kit - Flying Magnet - SBF - Windsor 289/302/351W - Use with MSD 6/7/8 Series Ignition - RedPart# 8640Free ShippingIn Stock
MSRP $760.95$607.95Save $153.00
MSDMSD Crank Trigger Wheel Kit - Flying Magnet - SBF - Windsor 289/302/351W - Use with MSD 6/7/8 Series Ignition - BlackPart# 86403Free ShippingIn Stock
MSRP $701.95$560.95Save $141.00
In Stock
MSRP $130.95$104.35Save $26.60
In Stock
MSRP $131.95$105.25Save $26.70













































































