MSD
MSD Ignition Coil - Blaster SS - Red
Part # 8207
Be the first to write a review
Universal - Add To Any MSD 6-Series Ignition
MSD Ignition Coil - Blaster SS - Red
In Stock
Free Shipping
$76.25
1
Emissions
This part is legal for sale and use on Emissions Controlled Vehicles, in all 50 states, when used in accordance with the manufacturers application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number.
See Emissions DetailsDon't let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps of current and maximum voltage output of 40,000 volts!
Note: If installing the Blaster SS Coil to a points distributor or a non-current limiting ignition system without an MSD Ignition, a 0.8 ohm ballast resistor is required (MSD PN 8214). The resistor should wire in series along with any factory resistors on the positive coil wire.
Features:
- Improved output coil for electronic ignitions, and MSD Ignitions
- Efficient winding design and assembly creates a compact housing
- Primary and secondary windings are encased in Ciba polyurethane
- 70:1 turns ratio and lower primary resistance produce high voltage output
- Tough, rigid housing with a tall tower and brass primary terminals
| Brand | MSD |
|---|---|
| C.A.R.B. EO # | D-40-37 |
| Category | Ignition |
| Coil Type | Blaster |
| Color | Red |
| Emission Code | 1 |
| Inductance | 6.9 mH |
| Maximum Voltage | 40,000 Volts |
| part type | Ignition Coil |
| Peak Current | 300 mA |
| Primary Resistance | .355 OHMs |
| Product Type | Ignition Coil |
| Secondary Resistance | 4.4K OHMs |
| Spark Duration | 220 uS |
| Sub Category | Ignition Coil |
| Turns Ratio | 2.917361111111111 |
| Warranty | Manufacturer's Limited 1 Year Warranty |
| Weight | 1.08 lbs. |
| UPC | 085132082070 |
| Warning | California Proposition 65 |
| Part Number | 8207 |
![Silicone 90° Spark Plug Boots & Terminals]()
Each boot provides excellent heat resistance as well as maximum protection against spark loss.$15.48Qty:![MSD Vibration Mounts, for Part #8207/82073 Blaster SS Series Coil]()
.44" x .50" 3 per Card, fits MSD Blaster SS Coil PN 8207$24.95Qty:
1
This part is legal for sale and use on Emissions Controlled Vehicles, in all 50 states, when used in accordance with the manufacturers application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number.
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
C.A.R.B. EO #D-40-37
Manufacturer's Limited 1 Year Warranty: See Details
Reviews
Be the first to write a review
Your Review
*Free Shipping & Handling only offered to the contiguous US on orders over $150, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.