MSD 7AL-3 Ignition Control

Part # 7330 Be the first to write a review

With start retard, 3-rev limits and a 4-stage retard, the 7AL-3 has all the features you need plus a RPM activated switch!

In Stock

Free Shipping

$1,099.95

Add to Wishlist

Emissions

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.
See Emissions Details

For racers that want adjustments at their fingertips, the 7AL-3 is the right choice. The 7AL-3 packs high voltage with four step retards, three rev limits and an rpm switch. All of the features are adjusted using plug-in modules including the 3-Step Rev Control and Multi-Step Retard. The Rev Control gives you the ability to set one rev limit for the burnout, another for the staging rpm limit and a third for use top end engine protection in the event of driveline failure. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus there's an RPM Activated Switch for precise control over a circuit. Something new is that the start retard is now adjustable with plug-in modules giving you better control over the amount of retard pulled out during cranking. The unit is supplied with a variety of rpm and timing modules. It is has a foot print that fits into the red 7AL-3's mount.

Features:

3-Step Rev Limiter
4-Stage Multi-Step Retard
RPM Activated Switch
Adjustable Start Retard
Cylinder Select 4, 6, 8 Cyl
Diagnostic Trigger LED

Brand	MSD
Category	Ignition
Color	Black
Connector Gender	Terminal Strip
Connector Quantity	3
Current Draw	6 Amps Per 6,000 RPM; 12 Amps at 12,000 RPM
Emission Code	4
Grade Type	Race
Height	5.75 IN
Ignition Type	Performance
Length	8.25 IN
Mount Type	Surface Mount
Mounting Hardware Included	Yes
Primary Voltage	570 Volts
Product Type	Ignition Box
RPM Range	14,000 RPM with 14.4 Volts
Secondary Voltage	50,000 Volts
Spark Duration	20 Deg Crankshaft Rotation
Spark Energy	160 mJ/spark
Sub Category	Control Modules
Terminal Gender	Terminal Strip
Terminal Quantity	18
Voltage Required	12-18 Volts, Negative Ground
Warranty	Manufacturer's Limited 1 Year Warranty
Weight and Size	4.85 lbs.,8.25"L x 3.75"W x 5.75"H
Width	3.75 IN
UPC	085132073306
Warning	California Proposition 65
Part Number	7330

MSD Cable Assembly - 2 Wire - 6 Foot
Replacement Harness - MSD Ignition to Distributor or Crank Trigger
Part# 8860
$29.83
Qty:
7000 Series Module Kit, Even Increments
RPM Module Kits include five modules in 200 rpm increments.
Part# 8747
$59.75
Qty:
Module Bypass Cable, GM HEI
For connecting MSD 6 or 7-Series Ignition or Timing Accessory directly into the magnetic trigger inside a GM HEI distributor.
Part# 8861
$15.74
Qty:
MSD Vibration Mounts, for MSD 7 Series Ignition Modules, 4-pack
1" x .75", 4/Card for use with MSD 7 series ignitions
Part# 8800
$32.91
Qty:
MSD 0 Degree Retard Module
Zero degree module for use when a module is not used
Part# 8773
$11.78
Qty:
MSD RPM Modules - 3000 Series Kit - Even Increments
RPM Module Kits Include Five Modules in 200 RPM Increments
Part# 8743
$65.85
Qty:
MSD High Current Relay, SPST
The SPST High Current Relay is rated at 30 amps with an input voltage of 12 volts DC.
Part# 8961
$59.25
Qty:
8000 Series Module Kit, Even Increments
RPM Module Kits include five modules in 200 rpm increments.
Part# 8748
$65.85
Qty:
Timing Retard Module Kit, 5°- 10° Retard Modules
Retard module kit for use with MSD timing controls.
Part# 8776
$65.89
Qty:
Timing Retard Module Kit, 11°-15° Retard Modules
Retard module kit for use with MSD timing controls.
Part# 8774
$59.25
Qty:
9000 Series Module Kit, Even Increments
RPM Module Kits include five modules in 200 rpm increments.
Part# 8749
$65.85
Qty:
Timing Retard Module Kit, 16° - 20° Modules
Retard module kit for use with MSD timing controls.
Part# 8775
Qty: