MSD
MSD PRO 600 CDI Ignition and Coil Kit - Red Coils
Part # 8000-8HO
Be the first to write a review
8-Channel Capacitive Discharge Race Ignition - 8280 High Output Coils - High Cylinder Pressure, High HP Engines utilizing Coil-Near-Plug Ignition
MSD PRO 600 CDI Ignition and Coil Kit - Red Coils
In Stock
Free Shipping - Lower 48 US States
$2,561.95
When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. The PRO 600 has built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. A programmable power setting allows racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software. What does this mean? Turn it down for the long haul and then set it to kill mode at the strip. This makes the PRO 600 ideal for a Drag Week style car and really any no-compromise vehicle.
Introducing the High Output version of MSD's PRO 600 CDI 8-channel Capacitive Discharge Ignition Kit (8008-8HO). Replacing the extremely capable 8232 coils, the 8280 High Output Ignition Coils take this kit even further than the tried and true 8000-8 Pro 600 Kit. Available in red or black, the 8280 coil has the goods to back up its aesthetics. With increased peak spark current, overall spark energy, and greater thermal efficiency, the 8280 is the perfect complement to the PRO 600 Ignition Box. Designed for coil-near-plug engine management systems such as Holley EFI, GM LS platforms, and most other EFI systems, the PRO 600 is also capable of easily converting any distributor type ignition into a coil-near-plug system.
Features:
- 3 Amps per 1,000 RPM @ 16 Volts and 600 mJ
- Direct Plugin to Holley EFI systems
- Spark duration of greater than 300 microseconds
- Eight outputs of up to 680 mJ of energy
- Plug-in interface with MSD Power-Grid, Davis Profiler and OEM LS-style coil harness
- Protection against shorted or open coils, and over temperature
- On the fly Power Output selection wire, selectable between low power and high power operation
- Additional CAN based features when used with Holley EFI - See addendum below
- Over 50 Kilovolts output voltage when used with MSD suggested coils
- 12 Volts minimum required for 600 mJ opereation
- Approved for NHRA Pro Mod Class
- Maximum Operating Voltage 22V
- Fits most coil-per-plug engines up to eight cylinders (Including four and six cylinders)
- Reverse Battery Protection
- Continuous 600 mJ operation without risk of failure from overheating
- Diagnostic LEDs help troubleshoot issues should they arise
- High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system
- 6 Volts minimum required for starting and running
- All necessary wiring harnesses included
- Compatible with most EFI systems, including 5V or 12V drivers
| Bolt Spacing | 2.82-2.90 IN |
|---|---|
| Brand | MSD |
| Category | Ignition |
| Color | Red |
| Connector Gender | Female |
| Connector Quantity | 2 |
| Current Draw | 1000 RPM |
| Emission Code | 4 |
| Grade Type | Race |
| Height | 9.3 IN |
| Ignition Coil Included | Yes (8280) |
| Ignition Type | Performance |
| Inductance (mH) | 500 |
| Length | 18.6 IN |
| Maximum RPM | 15,000 RPM / 10,000 RPM at Full Power |
| Maximum Voltage | 50,000 |
| Mount Type | Surface Mount |
| Mounting Hardware Included | Yes |
| Peak Current | 1700 4K |
| Primary Resistance | 0.064 82 |
| Primary Voltage | 515-520 |
| Product Type | Ignition Box |
| Secondary Voltage | 50,000 |
| Spark Duration | 0.345 MESC |
| Spark Energy (mJ per spark) | 680 |
| Terminal Gender | Male |
| Terminal Quantity | 37 |
| Type | Drag Race / Short Duration Use |
| Voltage Required | 6-22 |
| Warranty | Manufacturer's Limited 1 Year Warranty |
| Width | 13 IN |
| UPC | 090127133170 |
| Warning | California Proposition 65 |
| Part Number | 8000-8HO |
![MSD Ignition Coil - High Output - Red]()
Use with Pro 600 Ignition - Coil-Per-Cylinder Engines$57.95Qty:![MSD Coil Harness - Pro 600]()
![MSD EFI And LS Harness - Pro 600]()
Replacement Harness To Connect To EFI Systems Or LS Engines$91.75Qty:![MSD Power Grid Harness - Pro 600]()
Replacment Harness To Connect To MSD Power Grid Or Davis Profiler$121.45Qty:![MSD Vibration Mounts for 44 amp coil]()
Four mounts and hardware are included in each kit.$54.68Qty:
4
This part is legal for sale or use on Racing Use Only Vehicles
The following vehicles are considered Racing Use Only Vehicles:
- Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
Manufacturer's Limited 1 Year Warranty: See Details
Reviews
Be the first to write a review
Your Review
*Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.
MSD PRO 600 CDI Ignition and Coil Kit - Red Coils
$2,561.95