- Home /
- Deals /
- Sale /
- Crank Triggers /
- Crank Trigger Kits /
- MSD Crank Trigger Kit - Flying Magnet - Hall-Effect - LS Gen III/IV - 7.25 In.
MSD
MSD Crank Trigger Kit - Flying Magnet - Hall-Effect - LS Gen III/IV - 7.25 In.
Part # 8619
Be the first to write a review
Small Block Chevrolet - Gen III/IV - Adjustable Timing Pointer - Red
Read MorePart # 8619
Be the first to write a review
MSD Crank Trigger Kit - Flying Magnet - Hall-Effect - LS Gen III/IV - 7.25 In.
Small Block Chevrolet - Gen III/IV - Adjustable Timing Pointer - Red
In Stock
MSRP $818.95
$654.95
Save $164.00
Free Shipping - Lower 48 US States
In Stock
MSRP $818.95
$654.95
Save $164.00
Upgrading to an MSD Flying Magnet Crank Trigger Kit will deliver the precise and reliable signal that a high performance engine requires. This kit gives you the ability to control timing electronically through a Holley EFI ECU (or other standalone engine management system / ignition controller). At the heart of the kit is the 3-wire Hall-Effect Sensor that is easier to set up, less susceptible to EMI/RFI interference/noise, and less likely to have false signals than other methods (Distributors and VR Magnetic Sensors). In addition, they are less prone to mechanical failure since there are no wear parts. With the included high quality timing pointer and the use of a direct bolt-on, degreed balancer (ATI 917777 or 917211), you'll be able to adjust timing in the precise increments required for your LS Engine.
Features:
- 3-wire Hall-Effect Sensor that is not easily susceptible to EMI/RFI Interference
- Powerful magnets embedded in a 3/8” thick billet 6061-T6 aluminum trigger wheel
- Rigid mounting that will not flex and cause timing fluctuation
- Easy to install much like traditional MSD Crank Trigger Kits (use with ATI Balancer - 917777 or 917211)
- Allows precise indexing by utilizing the 10 degree range on included timing pointer
- Most accurate way to trigger your electronic fuel injection (EFI)
| Brand | MSD |
|---|---|
| Category | Ignition |
| Color | Red |
| Diameter | 7.25 IN |
| Emission Code | 4 |
| Makes | Chevrolet |
| Operating Voltage | 5-20 |
| part type | Ignition Crank Trigger Kit |
| Product Type | Crank Trigger Kit |
| Sensor Type | Hall Effect |
| Sub Category | Sensors |
| Warranty | Manufacturer's Limited 1 Year Warranty |
| UPC | 090127130087 |
| Warning | California Proposition 65 |
| Part Number | 8619 |
4
This part is legal for sale or use on Racing Use Only Vehicles
The following vehicles are considered Racing Use Only Vehicles:
- Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
On some vehicles the MSD Crank Trigger Kit may require slight modifications
to accommodate special engine plates, pulley systems, etc.
This kit is designed to be used with the ATI Harmonic Balancer 917777 and
917211. This kit is also compatible with Meziere water pump WP333.
Manufacturer's Limited 1 Year Warranty: See Details
Recently Viewed Items
Reviews
Be the first to write a review
Your Review
Items 0 - 0 of 0
per page
Page:
- 1
Items 0 - 0 of 0
per page
Page:
- 1
*Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.
MSD Crank Trigger Kit - Flying Magnet - Hall-Effect - LS Gen III/IV - 7.25 In.
MSRP $818.95
$654.95
Save $164.00

