MSD
Ford 351W Ready-To-Run Pro-Billet Distributor Steel Gear
Part # 83541
Be the first to write a review
Ready-to-run distributors include a built-in ignition module. No MSD Ignition control required. Includes an steel gear and a rev limiter
Ford 351W Ready-To-Run Pro-Billet Distributor Steel Gear
In Stock
Free Shipping
MSRP $843.95
$673.95
Save $170.00
Does it fit my vehicle?Does it fit my engine?
3
Emissions
This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.
See Emissions DetailsThe billet aluminum housings of these distributors are 5/8" smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pickup is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft.
Beneath the bolt down cap and MSD race rotor you'll find MSD's accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives. For protection, there is also an easy-to-set rev limiter!
MSD's Ready-to-Run Ford Distributors are the perfect upgrade for bulky DuraSpark systems or ancient breaker point models. These distributors come complete and ready-to-run. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance.
Features:
- Does not require an MSD Ignition Control
- Easy-to-adjust mechanical advance with supplied springs and stop bushings
- Mechanical advance assembly can be locked out for crank trigger systems
- Powerful built-in module produces a 7.5 amp single spark through high rpm
- Advance plate and weights are fine blanked from chrome moly steel and QPQ coated for friction reduction
- Simple and clean installation with only three wires to connect
- Nylon pads ensure smooth operation of the advance weights
- Polished steel shaft is QPQ coated and guided by a sealed ball bearing
- Equipped with Steel Gear
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Note: Will not fit XD and later Australian 351 Cleveland engines.
- CARB E.O. Approved
- Supplied with small diameter cap with HEI style terminals and race rotor (will accept 8441 Cap-A-Dapt)
- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range
- Advance weight pins are staked and tig welded to the plate
- Includes built-in Rev Limiter!
- Housing is 5/8” smaller in diameter than stock Ford distributors
| Brand | MSD |
|---|---|
| Category | Ignition |
| Color | Red |
| Distributor Cap Included | Yes |
| Distributor Type | Ready To Run |
| Emission Code | 3 |
| Engine | Ford 351W |
| Gear | Steel |
| Gear Material | Steel Melonized QPQ Coated |
| Grade Type | Performance |
| Ignition Box Required | No |
| Ignition Coil Included | No |
| Ignition Rotor Included | Yes |
| part type | Distributor |
| Product Type | Distributor |
| Sub Category | Distributor and Magneto |
| Warranty | Manufacturer's Limited 1 Year Warranty |
| UPC | 085132835416 |
| Warning | California Proposition 65 |
| Part Number | 83541 |
![Black Distributor Cap for PN 8570, 8545, 8546]()
![Ford 302 and 351W Steel Distributor Gear]()
The 85834 STEEL gear is a direct replacement for the 8455 & 8456 5.0L EFI distributors, and also fits 351W distributors with 0.531" ID.$143.05Qty:![MSD Wiring Harness - 3-Pin]()
![Ford 351W Iron Distributor Gear]()
Provides long life, an easy break-in period and reliable performance!$41.48Qty:![Red Distributor Cap]()
3
This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
Manufacturer's Limited 1 Year Warranty: See Details
Reviews
Be the first to write a review
Your Review
*Free Shipping & Handling only offered to the contiguous US on orders over $150, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.
Ford 351W Ready-To-Run Pro-Billet Distributor Steel Gear
MSRP $843.95
$673.95
Save $170.00