Fall Overstock Sale - Save up to 50% MSD products!
1-888-258-3835
5
Images
Videos
MSD

MSD Ignition Coil - Smart - Red

Part # 8289 Be the first to write a review

Universal - Use with Holley or MSD EFI Systems

MSD Ignition Coil - Smart - Red

In Stock
Free Shipping on orders over $150*
MSRP $148.95
$92.59
Save $56.36
Add to Wishlist
3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details
Unique elongated mounting holes accommodate IGN-1A mounting brackets or allow it to bolt in place of an LS coil with 72mm bolt spacing. The MSD Smart Coil will bolt right on to Holley LS cast aluminum valve covers for a super clean look. Available in red or black, there's a set ready for your build. The MSD Smart Coil is a direct replacement for the popular IGN-1A coil. Here's the difference; it produces more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. It is compatible with Holley EFI and many other aftermarket electronic fuel injection systems and will run on traditional 12 volt or 16 volt electrical systems found in race applications.

Features:

  • Built-in ignitor for compatibility with Holley EFI and many other aftermarket ECU’s
  • Connector and Pins Included
  • Available in red or black to match your build
  • Maximum operating voltage of 17 volts – for compatibility with both 12 volt and 16 volt electrical systems found in many performance/race applications
  • Same wiring pinout as other IGN-1A coils for easy plugin upgrades
  • Low current draw means less demand on the electrical and charging system
  • Direct bolt-on to Holley cast aluminum LS valve covers with 72mm bolt spacing
  • More spark energy than any other IGN-1A smart coil on the market for maximum fuel burn during combustion sequence
  • Elongated mounting holes to allow direct replacement of IGN-1A coils and will bolt in place of factory LS 1/2/3/6/7 coils with 72mm bolt spacing
Brand MSD
CategoryIgnition
Coil TypeSmart Coil
ColorRed
Emission Code3
Inductance (mH)5.2
Maximum Voltage50,000
part typeIgnition Coil
Peak Current (mJ)201
Primary Resistance0.55 82
Product TypeIgnition Coil
QuantityIndividual
Sub CategoryIgnition Coil
Turns Ratio2.88
WarrantyManufacturer's Limited 1 Year Warranty
UPC090127077252
WarningCalifornia Proposition 65
Part Number8289
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Instructions - 8289_82893_instructions_frm35627_.pdf
The supplied connectors and pins are "Pull to Seat " This means that you need to insert the wire through the connector from the back, crimp the pin and pull it back into the connector for assembly. Always use proper crimping tools to ensure a proper connection.
Manufacturer's Limited 1 Year Warranty: See Details

We Suggest

Recently Viewed Items
MSD
Ignition Coil - Smart - Red
Universal - Use with Holley or MSD EFI Systems
Part# 8289
MSRP $0.00
$92.59
Save $56.36
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $150, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.