• Improve consistency through precise activation of circuits.
• Easy to program from a PC with MSD’s Pro-Data+ Windows based software or with the optional Hand Held Monitor (PN 7550).
• Quick microcontroller analyzes input and output signals for accuracy.
• LEDs display the channel being activated as well as assist in troubleshooting.

PN 7560

Programmable 5-Stage Delay,
PN 7560
If you want certain circuits to be activated at a precise time during a run, the Programmable 5-Stage Delay is the answer.
The Delay has five different outputs that can be timed in sequence to activate different circuits or solenoids. Each of the outputs can be programmed to activate or deactivate a circuit from 0.001 - 5.000 seconds. The outputs consist of individual Smart-FET drivers which are monitored by the microcontroller for overload or short circuits. In this event, an LED will show an alert. Each Delay also has an LED to show its activity.
The Programmable 5-Stage Delay is a stand alone control and can be used with most any ignition system.

Programmable 5-Stage Delay PN 7560*