MSD Products Selection:           Choose a category from below 
Part number: 2346
The Universal Sync Signal Kit, PN 2346, is primarily used to provide a cam sync to EFI or other engine control units that require a signal for cylinde (...)
Part number: 8010
MSD’s Billet Distributor Hold Down Clamps are strong enough to keep the timing locked in place whether you are using an MSD Billet Distributor or Pro (...)
Part number: 8110
MSD’s Billet Distributor Hold Down Clamps are strong enough to keep the timing locked in place whether you are using an MSD Billet Distributor or Pro (...)
Part number: 8276
MSD’s Non-Magnetic Pick-Ups are engineered for extreme applications. In fact, this Pick-Up was designed and tested on 300+ mph top fuel dragsters! To (...)
Part number: 8415
To obtain maximum performance, many engine builders actually modify the distributor’s reluctor to obtain different timing for each specific cylinder. (...)
Part number: 84211
When you install EFI on your engine, most systems will require the ignition timing to be advanced for the ECU. This can cause issues with rotor phasin (...)
Part number: 8463
This is the replacement canister for MSD distributors equipped with vacuum advance (except the PN 8365 and PN 8362 HEI Distributors.)
Part number: 8464
The MSD Distributor Advance Kits are the same kits that come with your MSD Distribu­tor. The kit contains an assort­ment of springs and advance limit (...)
Part number: 84661
The MSD Magnetic Pick-Up replace­ment is the same high output assem­bly that is currently found in all MSD Distributors. It is supplied with the two p (...)
Part number: 84665
Ignition Module/Pickup Kit for MSD PN 8366 and 8367.
Replacement Ignition Module for PN 8366/8367
Part number: 8468
This bracket allows you to easily remove the vacuum ad­vance from MSD distributors that are CW rotation (except PN 8365 and PN 8362).
Part number: 8491
The standard tach drive for MSD Tach Drive Distributors is a 3/16” tang drive cable. In most cases this type of drive will work, but for those who req (...)
Part number: 8494
O-ring kit fits all MSD Chevrolet Distributors
Part number: 8505
This is a replacement pick-up for older style crank trigger systems that require a magnetic pick-up. This pick-up is magnet­ic and must be used with a (...)
Part number: 8509
N/A
Part number: 8513
Our Chevrolet Front Drive Distributors brought the need for a distributor plug. Both are billet aluminum and feature a slip collar to ensure cor­rect (...)
Part number: 8539
Replacement adjustable collar for all MSD slip collar distributors.
Part number: 8568
Molded from strong, durable Rynite material these rotors are designed specifically for MSD Crank Trigger Distributors. The rotor tip is secured with a (...)
Part number: 8628
Weight kits fits all MSD Distributors. Allows you to tailor you timing curve for your particular application.
Part number: 7408
N/A
Part number: 7411
The directional rotor tip is designed to handle large amounts of retard in high voltage applications.
Part number: 7445
 The Pro-Cap has a big five inch diameter with two full inches between each terminal! This ensures accurate spark delivery and far less chance of spar (...)
Part number: 8014
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style ter (...)
Part number: 8017
 If the late ’90’s GM used a funky looking cap and rotor, commonly referred to as the Vortech Distributor. These caps offer a corrected position of th (...)
Part number: 8092
All new Rynite injected rotors for MSD’s Honda/Acura Caps!
Part number: 82903
MSD’s Honda and Acura Modified Distributor Kits are specially constructed to allow the use of a powerful external Blaster Series Coil.Each cap is spec (...)
Part number: 82921
Modified Distributor cap
Part number: 82922
One of the best upgrades you can make with a Honda engine is to bypass the weak internal coil. These new caps allow you to take advantage of an extern (...)
Part number: 82923
MSD’s Honda and Acura Modified Distributor Kits are specially constructed to allow the use of a powerful external Blaster Series Coil.Each cap is spec (...)
Part number: 82933
MSD’s Honda and Acura Modified Distributor Kits are specially constructed to allow the use of a powerful external Blaster Series Coil.Each cap is spec (...)
Part number: 8296
These caps feature the same great build-up of the Extreme Caps, but do not accept an external coil. Designed as a factory replacement. This caps still (...)
Part number: 8406
The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always r (...)
Part number: 8407
MSD Distributor Rotors are molded from high quality, voltage insulating material to resist carbon tracking while ensuring that the ignition spark reac (...)
Part number: 8408
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style ter (...)
Part number: 84083
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style ter (...)
Part number: 84085
The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always r (...)
Part number: 8414
The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always r (...)
Part number: 8420
If the new Pro-Cap doesn’t work on your application, these MSD Cap-A-Dapts will do the trick. The MSD Cap-A-Dapt adapts a large, Ford style cap onto y (...)
Part number: 8423
Band clamp mount allows easy rotor phasing adjustment The only front drive distributor with adjustable belt tension The MSD Cap and Rotor are injectio (...)
Part number: 8426
All MSD Extra Duty Distributor Caps are designed with performance in mind and are molded from high quality, voltage insulating material and use low re (...)
Part number: 8428
This kit will help you achieve the solid ignition timing you need! The Kit comes with new advance weights, springs to set the rate of advance and new (...)
Part number: 8430
The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always r (...)
Part number: 8431
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style ter (...)
Part number: 84313
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style ter (...)
Part number: 84314
Distributor Cap for use with PN 8488 Distributor.
Part number: 84315
The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always r (...)
Part number: 84316
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style ter (...)
Part number: 8433
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style ter (...)
Part number: 84333
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style ter (...)
Part number: 84335
The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always r (...)
Part number: 8434
All MSD Extra Duty Distributor Caps are designed with performance in mind and are molded from high quality, voltage insulating material and use low re (...)
Part number: 8437
All MSD Extra Duty Distributor Caps are designed with performance in mind and are molded from high quality, voltage insulating material and use low re (...)
Part number: 8441
If the new Pro-Cap doesn’t work on your application, these MSD Cap-A-Dapts will do the trick. The MSD Cap-A-Dapt adapts a large, Ford style cap onto y (...)
Part number: 8442
The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always r (...)
Part number: 8445
If the new Pro-Cap doesn’t work on your application, these MSD Cap-A-Dapts will do the trick. The MSD Cap-A-Dapt adapts a large, Ford style cap onto y (...)
Part number: 8450
The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always r (...)
Part number: 8457
Molded from strong, durable Rynite material these rotors are designed specifically for MSD Crank Trigger Distributors. The rotor tip is secured with a (...)
Part number: 8467
These rotors are designed with high rpm and performance in mind which is why they are standard on most MSD Pro-Billet Distributors. Rotors are injecti (...)
Part number: 8482
The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always r (...)
Part number: 8541
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style ter (...)
Part number: 8565
MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style ter (...)
Part number: 8567
Molded from strong, durable Rynite material these rotors are designed specifically for MSD Crank Trigger Distributors. The rotor tip is secured with a (...)
Part number: 8005
This Gear Test Fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they wa (...)
Part number: 8471
MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This special com­bination creates high-strength (...)
Part number: 8472
Absolute timing accuracy cannot be achieved until every me­chanical detail is handled. MSD’s new bronze oversized gears help obtain perfect timing by (...)
Part number: 8531
A distributor’s performance is only as good as its drive gear. MSD Ignition has put a great deal of effort into researching and testing a variety of m (...)
Part number: 8561
A distributor’s performance is only as good as its drive gear. MSD Ignition has put a great deal of effort into researching and testing a variety of m (...)
Part number: 85631
MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This special com­bination creates high-strength (...)
Part number: 8581
MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This special com­bination creates high-strength (...)
Part number: 85812
A distributor’s performance is only as good as its drive gear. MSD Ignition has put a great deal of effort into researching and testing a variety of m (...)
Part number: 85813
A distributor’s performance is only as good as its drive gear. MSD Ignition has put a great deal of effort into researching and testing a variety (...)
Part number: 8583
MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This special com­bination creates high-strength (...)
Part number: 85832
A distributor’s performance is only as good as its drive gear. MSD Ignition has put a great deal of effort into researching and testing a variety of m (...)
Part number: 85833
A distributor’s performance is only as good as its drive gear. MSD Performance has put a great deal of effort into researching and testing a variety o (...)
Part number: 85834
A distributor’s performance is only as good as its drive gear. MSD Ignition has put a great deal of effort into researching and testing a variety of m (...)
Part number: 85852
A distributor’s performance is only as good as its drive gear. MSD Ignition has put a great deal of effort into researching and testing a variety of m (...)
Part number: 8585
MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This special com­bination creates high-strength (...)