
PN 7800
PN
7802
MSD
8 PN 7800
|

MSD
8 Ignition, Pro Race PN 7800
The MSD 8 Ignition
Control is powerful enough to burn any exotic fuel mixture even in
engines with massive compression ratios. The ignition produces extremely
high energy sparks combined with a long duration spark series below
3,000 rpm. A Coil Coupler is built-in to increase spark duration and
protect the ignition against voltage spikes.
To protect the engine from overrev
damage the MSD Engine Saver, PN 8978, can be installed. It provides
two adjustable rpm limits and installs with a special Weathertight
Connector. Vibration shock mounts are supplied along with a separate
current filter to prevent interference from other electronic controls
on the car.
MSD
8 Ignition Control
PN 7800 *

Dual
Coil MSD 8 Ignition, Pro Race PN 7802
After a brief hiatus, the Dual Coil 8 is back! Designed specifically
for engines running dual spark plugs per cylinder. This is a favorite
among puller competitions as it takes a single trigger source to
fire both spark plugs at once.
Dual
Coil MSD 8 Ignition Control
PN 7802*
MSD 8 Engine Saver PN 8978*
MSD offers an Engine Saver for the MSD 8. This control provides two
rev limits that are adjustable with MSD’s rpm modules to give
you overrev protection and an rpm launch limit.
|
OPERATING
SPECIFICATIONS FOR MSD 8 PN 7800
|
| Spark
Energy: |
315-345
MilliJoules/Spark |
| Primary
Voltage: |
480
Volts |
| Secondary
Voltage: |
50,000
Volts Plus |
| Spark
Series Duration: |
20°
Crankshaft Rotation |
| RPM
Range: |
15,000
RPM w/14.4 Volts |
| Voltage
Required: |
12-18
Volts, Negative Ground |
| Current
Draw : |
36
Amps@12,000 RPM |
| Weight
and Size: |
7
lbs., 10"L x 3.75"W x 5.75"H |
|