• Control a fan, pump or solenoid through your laptop.
• Program the frequency of the circuit being used.
• Plugs into the MSD CPC Ignition System.
  
  
  Dual PWM Driver PN 7610

Dual PWM Driver
This Pulse Width Modulated dual driver is for use with the MSD CPC Ignition, PN 7600. It allows you to program a high current pulsed drive to pumps, fans, solenoids or even waste gates.
There are two 15 amp continuous output circuits that can also be connected in parallel to drive a single circuit with up to a 30 amp load. The frequency of the circuit being driven is programmable to work with 24Hz such as a nitrous solenoid to 12KHz like a high current pump. All of this is programmed within the CPC Ignition’s software and can be set to within +/-0.25 psia or 100 rpm.

Dual PWM Driver,
for the CPC Ignition
PN 7610