MSD DIS 2 with Standalone ECU Wiring

[WIDERSTURBO]

Hello all, I getting ready to install a MSD dis2 62112 with a standalone ECU (Megasquirt for those that are familiar with it) and just wanted to run the wiring through someone prior to installing the two together. The vehicle is a 420a motor found in the 95-99 Mitsu Eclipse and all factory wiring and ECU is completely gone. I have attatched the wiring diagram below that I have modified for my application of how I believe it should be wired between the Megasquirt ECU and the DIS2. Any help would be greatly appreciated. Also, in this diagram below, I will NOT be using whatever the 8 pin bypass connector is..Thanks!