BBC with NOS and trans brake

[jumbo]

Im just putting the finishing touches on my project , BBC, tbrake and nos are on so the electrical and ignition are next and this was my plan , truck will be street driven and ran at the track couple times a year

ignitin box #6520 6 plus
distributor #8361
coil #8207
wires #35379

I think this is everything I need but could be wrong , the 6plus has start retard , 2 stage rev and timing retard for my nos setup . The coil im not sure is right for my application and if its ok the wires should work or would the blaster 3 be better or please recomend one . The distributor I picked keeps vac advance and is the smaller size I could use as the current HEI is tight

thanks in advance

[msdtech1955]

ignitin box #6520 6 plus
http://www.msdignition.com/product.a...004&terms=6520

distributor #8361
http://www.msdignition.com/product.a...353&terms=8361

coil #8207
http://www.msdignition.com/product.a...011&terms=8207

wires #35379
http://www.msdignition.com/product.a...65&terms=35379

I think this is everything I need but could be wrong , the 6plus has start retard , 2 stage rev and timing retard for my nos setup . The coil im not sure is right for my application and if its ok the wires should work or would the blaster 3 be better or please recomend one . The distributor I picked keeps vac advance and is the smaller size I could use as the current HEI is tight

yes that coil will work....are you using a progessive controller with the nitrous? or having it come on with a digi set or maybe after the transbrake is released?

[jumbo]

Nos was just going to be on a micro switch oFf arming switch , just a 100 shot

[jumbo]

Is there a better coil for my application ?