MSD Tech Support Forums

Go Back   MSD Tech Support Forums > MSD General Discussion Forums > Suggestions and Feedback

Suggestions and Feedback Use this forum to post feedback and suggestions

Reply
 
Thread Tools
  #1  
Old 05-02-2012, 07:54 PM
FONC FONC is offline
Junior Member
 
Join Date: Dec 2011
Posts: 12
Unhappy Msd-7ml-2

To say I was disappointed with your help on a problem we had with a repaired MSD unit which had been repaired by an authorised MSD dealer would be an understatement.

This unit only fails under load and/or in its application. It will not fail on a MSD single channel Ignition testing unit.

We use a total MSD Ignition system. Distributor, Leads, and Coil. Spark plugs are Autolite Racing Plugs set at 0.035".

Surely MSD must know what internal part/parts of this unit would fail and cause a total loss of ignition and or backfiring just before total ignition shutdown. Then be able to restart motor in less than 60 seconds only to do the same thing again and again.
Upon a visual inspection of the units internal components there are no signs of any catostrophic failures.

Maybe after using the MSD Brand for nearly 40 odd years it is time to look towards another Manufacturer who will better support their products. and
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:58 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
2011 MSD Performance