MSD Tech Support Forums

Go Back   MSD Tech Support Forums > Nitrous Diagram Help

Nitrous Diagram Help Collection of Nitrous diagrams for different setups.

Reply
 
Thread Tools
  #1  
Old 03-29-2012, 11:27 PM
tx434 tx434 is offline
Junior Member
 
Join Date: Apr 2005
Posts: 3
Default Best way for the Step Retard

I purchased a car with a single stage nitrous system, a 7531 and a Edy 71900 and the car has the nitrous through the progessive but the Step 1 (pink wire) is straight to a 12v activating the nitrous as well so when staging the car and attempting to run the spray it is pulling out timing right away. What is the best way to pull timing out with the Step 1 retard? I want it on a time not RPM, can I set to 800 RPM and with 12v applied can I have it set to like .40 and it should work, correct? Or will I have to get a separate timer?

Please advise
Reply With Quote
  #2  
Old 03-30-2012, 08:22 AM
msdtech1955's Avatar
msdtech1955 msdtech1955 is offline
Senior Member
 
Join Date: Jan 2008
Posts: 9,087
Default

http://www.yellowbullet.com/forum/sh...d.php?t=460626



this is how the step retard works....

Step Retard Ramp: Each retard step can be ramped from its full and
retard amount over a time based program. There is a Sec 0.0 adjustment and
for each step. This allows you to select an amount of time to ramp the retard
from its activation value to zero 0 retard. It is adjustable from 0-2.5
seconds and in 0.01 second increments. Default is 0.

RPM The minimum engine rpm that must be reached before a step retard is
activated.
ON The amount of time it takes for the step retard to reach its Retard Degree.
Allows a gradual ramp ON time to reach the Retard Degree.
User adjustable from 0.00 to 2.50 sec. (0.01 sec increments)
OFF The amount of time it takes for the step to retard to reach NO retard.
Allows a gradual ramp OFF time to reach NO Retard.
User adjustable from 0.00 to 2.50 sec. (0.01 sec increments)
Note: See Graphs Below:
Deg The amount of retard.


but, the simple route would be to use a digi-set timer.
also, are you using relays at the line to turn on nitrous when trans brake is released?

Last edited by msdtech1955; 03-30-2012 at 08:32 AM.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:24 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
2011 MSD Performance