MSD Tech Support Forums

Go Back   MSD Tech Support Forums > MSD Powersports Forums > Installation Questions

Installation Questions Wiring diagrams and tech notes for powersport applications

Reply
 
Thread Tools
  #1  
Old 02-02-2012, 06:34 AM
COLIN COLIN is offline
Junior Member
 
Join Date: Jan 2012
Posts: 3
Default MSD MC-1 or MC-2

Hi, hereís hoping someone can help me out.
I have recently acquired a new never used MSD ignition unit, on the box it says Pt # 4210, on the unit it says MC-1 4220 (Ser # 9424), from what I have read 4210 is a MC1 and a 4220 is a MC2, do I have a MC-1 or a MC-2 unit. I think I have a MC-2, what is the difference between them.
Next question, I have wired it up to the MC-2 wiring diagram (fig 4) and everything works fine but as soon as I use anything electrical on the bike the ignition cutís out, itís as if the MSD unit is using all of the power from the electrical system with nothing left to run anything else.
I have fitted it to a Suzuki GS1100G (1982) with transistorized ignition fitted as standard, it has a new 14amp/hr battery and the charging system is working fine pushing out a healthy 14volts.
Thanks for any help Colin.
Reply With Quote
  #2  
Old 02-06-2012, 09:22 AM
msdtech1955's Avatar
msdtech1955 msdtech1955 is offline
Senior Member
 
Join Date: Jan 2008
Posts: 8,833
Default

the guys from powersports will be right with ya.
Reply With Quote
  #3  
Old 02-10-2012, 04:26 AM
COLIN COLIN is offline
Junior Member
 
Join Date: Jan 2012
Posts: 3
Default

Oh good but will be any time soon.
Reply With Quote
  #4  
Old 02-10-2012, 08:11 AM
msdpowersports1's Avatar
msdpowersports1 msdpowersports1 is offline
Moderator
 
Join Date: Feb 2005
Posts: 271
Default

The difference between the two units is the MC-2 has a shift kill on all the versions where the MC-1 only had it on the later version just before we switched over to the MC-2 and the MC-2 was a potted unit and could not be repairs. As far as the engine cutting off it could be the way the bike is wired is there any way I can have your phone number so I can give you a call or if you like please give me a call to go over it.

rcorral@msdpowersports.com

Thank you
Ray C.
1-915-856-2727
Reply With Quote
  #5  
Old 02-13-2012, 09:45 AM
COLIN COLIN is offline
Junior Member
 
Join Date: Jan 2012
Posts: 3
Default

Thanks for the reply but Iím in the UK so I donít think a telephone conversation would be very cost affective although probably the best way of communicating.
Is there any info that I could give you that may help you in trying to sort out this little problem?
If you do feel you could contact by phone then please let me know and Iíll give you my number.
Thanks Colin.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
©2011 MSD Performance