MSD Tech Support Forums

Go Back   MSD Tech Support Forums > MSD Powersports Forums > Powersports Trouble-Shooting

Powersports Trouble-Shooting Diagnose your powersports ignition

Reply
 
Thread Tools
  #1  
Old 10-23-2011, 08:39 PM
gav00 gav00 is offline
Junior Member
 
Join Date: Oct 2011
Posts: 2
Default total loss on polaris octane spark once

i have just fitted pn-00-00-2530
the ski will either start and run fine, or not run but spark once and not again until you turn the ignition off and back on, then it will either start or do the same thing. i have only just fitted the msd (not been in the water yet) after after sparking once, the red led on msd will flash
rapidly whilst you crank it. i have tried 2 different battery's (both new)
Reply With Quote
  #2  
Old 11-02-2011, 03:41 PM
gav00 gav00 is offline
Junior Member
 
Join Date: Oct 2011
Posts: 2
Default

worked out the problem
i swapped the cdi box over with one that i have for a limeted ski(that runs fine)
and fixed
so out of the box the msd cdi is faulty strange hay
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
2011 MSD Performance