MSD Tech Support Forums

Go Back   MSD Tech Support Forums > Boosted Diagram Help

Boosted Diagram Help Collection of diagrams for Supercharged, Turbo setups

Reply
 
Thread Tools
  #1  
Old 08-03-2011, 10:12 AM
msdtech21's Avatar
msdtech21 msdtech21 is offline
Tech Support
 
Join Date: Mar 2006
Posts: 1,229
Default 7562 Boost controller plumbing (NOT WHATS INCLUDED WITH THE INSTRUCTIONS)

7562 plumbing.JPG
7562 plumbing dual gates1.jpg
7562 plumbing MAP at gate.jpg
Boost 031 explained.jpg

I recommend using Co2 for the top part of the gate as the constant pressure on top of the gate seems to have the most reliable results.

The Racepak 75psig sensor is PN 810-PT-75GVT.

When monitoring Co2 pressure on top of the gate, the unit will use Co2 to try and control boost pressure whenever the engine is running. I'd recommend just putting the boost controller on a seperate toggle switch that's only activated when the car is being staged to keep it from wasting Co2.

When starting off with a fresh install, I recommend setting the boost controller PID settings to -
P 30
I 15
D 0

P controls how fast the unit will rise to the target pressure.
I is the constant the controls boost pressure once its at the target and keeps it from varying at that point.
D is what keeps the boost controller from overshooting the target pressure.

Last edited by msdtech21; 08-03-2011 at 10:20 AM.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
2011 MSD Performance