MSD Tech Support Forums

Go Back   MSD Tech Support Forums > MSD Powersports Forums > Installation Questions

Installation Questions Wiring diagrams and tech notes for powersport applications

Reply
 
Thread Tools
  #1  
Old 12-03-2010, 01:28 PM
xerospeed xerospeed is offline
Junior Member
 
Join Date: Dec 2010
Posts: 1
Default 4217 Single Cyl Question

Hey, I am interested in using the 4217 Single Cylinder Programmable ignition on my 1993 Yamaha WR500 Dirtbike engine. It uses a pretty standard ignition magneto with pulser coil to tell the cdi to fire the coil.

Can I just send the signal from the pulser-coil to the 4217 as my reference, or do i need to setup some different form of pickup?

Thanks
mike
Reply With Quote
  #2  
Old 01-11-2011, 11:13 AM
msdpowersports1's Avatar
msdpowersports1 msdpowersports1 is offline
Moderator
 
Join Date: Feb 2005
Posts: 275
Default

The 4217 ignition will work with a two wire mag pickup or a Hall Effect trigger system. As long as your Yamaha is equipped with a two wire pickup you can connect the stock pickup wires to the violet and green wire coming from the 4217 unit. Remember this unit is not pre programmed for your engine you will need to use the supplied software to set up the ignition for your application.

Thank you
Ray
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
2011 MSD Performance