|
|
#1
10-26-2010, 06:03 PM
|
|||
|
|||
boost timing master
will the boost timing master p.n. 5462 work on any motor. Mine is a 1969 buick 225 v6 odd fire with a modified points eliminator kit and a mallory coil. Will this box work on a turbo blowthru carb setup with this motor
|
|
#2
10-27-2010, 09:29 AM
|
||||
|
||||
|
unfortunately, it will not work on a odd fire ...it would have to be sent back to us and modified ..35.00 charge
|
|
#3
10-27-2010, 05:12 PM
|
|||
|
|||
|
am looking at buying one so could I have it modified at order time? What has to be changed?
|
|
#4
11-01-2010, 10:21 AM
|
||||
|
||||
|
if you buy it directly from us....the duration and the mag input circuit has to be updated for any odd fire operation .
|
|
#5
11-01-2010, 04:15 PM
|
|||
|
|||
|
great thanks. And what about a rev limiter box and tack signal? Cold you help with this. my tack in car obviously blips
|
|
#6
11-03-2010, 07:04 AM
|
||||
|
||||
|
what brand of tach is it ?
|
|
#7
11-15-2010, 08:16 PM
|
|||
|
|||
|
the gauges say veglia boaletti electronic fiat
|
|
#8
11-16-2010, 08:37 AM
|
||||
|
||||
|
If you are getting an obvious blip on the tach with the stock system the MSD Ignition box may not correct it. It depends on what is causing the problem. However, in some cases the factory tach may require an adapter in order for the tach to get the proper signal from the ignition box.
__________________
MSD Tech Support 915-855-7123
|
|
#9
11-16-2010, 06:03 PM
|
|||
|
|||
|
not too be rude but I think Ive mentioned i have an oddfire buick wich means the ignition signal is not constant like a normal v6.
|
|
#10
11-25-2010, 05:07 AM
|
|||
|
|||
|
do you know what im getting at?
|
 |
| Bookmarks |
| Thread Tools | |
|
|
