|
|
#1
08-24-2007, 01:30 PM
|
||||
|
||||
**UPDATED**Wiring Diagrams and Tech Notes
MSD’s latest Wiring Diagrams and Tech Notes book is packed with MSD installations and information! There are over 192 pages of technical info and updated wiring diagrams with MSD 6’s, MSD 7s, Timing Controls, RPM Controls and more. Every speed shop, garage and toolbox should have this MSD bible on hand!
Download it here. PS. Its a 13 megabyte file so dial-up users beware. MSD Admin
__________________
MSD Tech Support 915-855-7123 Last edited by msd_admin; 08-18-2009 at 02:26 PM. 
|
|
#2
09-09-2007, 08:06 PM
|
|||
|
|||
MSD10 to Gen7 v6.0 wiring diagram
I have some ?'s about wiring my MSD10(not a plus) to my Gen7 DFI. I was told to wire the pink from the Gen 7 to the 3rd terminal down on the Rside where the red "key on" would go and the blue on the 4th term down. I have 12V to the pink with the key on but no spark to the plugs and no power on the + side of the blaster coil.
The wiring on the left is as the directions state from the power coupler coil to the box & blaster coil. There are no RPM plugs in either Mode 1 or 2. Any idea where to start? I have a Gen7 w/version6 software and an MSD crank trigger & crab distributor with a cam sensor in the fr cover to a magnet in the top timing gear.
|
 |
| Bookmarks |
| Thread Tools | |
|
|
