MSD Tech Support Forums

Go Back   MSD Tech Support Forums > MSD Ignition Forums > Pro Data+ Software

Pro Data+ Software Questions concerning our Pro Data+ Software

Reply
 
Thread Tools
  #1  
Old 10-10-2012, 09:19 AM
pinyturbo pinyturbo is offline
Junior Member
 
Join Date: Sep 2012
Posts: 3
Default 6530 boost curve

Got carb situation everything is good. Learning the pro data software. Where to start or wats easiest way to figure out where to start pulling timing for boost
Reply With Quote
  #2  
Old 10-11-2012, 09:38 AM
msdtech27's Avatar
msdtech27 msdtech27 is offline
Certified MSD Tech
 
Join Date: Sep 2008
Posts: 626
Default

here is an example of a boost retard curve file with vacuum advance. the base timing was set to 42 blower was building about 5psi. our Atmospheric pressure is at 12, so yours may vary.
you will need to set your TOTAL timing first with your distributor locked out. If you will be taking more than 18 of timng away I would highly recomend using a phaseable rotor in your distributor.
Now, since i'm running vacuum advance both the retard from the MAP curve and the RUN curve will add to each other. I fine tuned the timing on the vehicle while someone else is driving.. do this at your own risk, never drive and use a computer at the same time!!
Attached Images
File Type: jpg 6530 vac-boost curve eplained.JPG (235.5 KB, 144 views)
__________________

Last edited by msdtech27; 10-11-2012 at 09:45 AM.
Reply With Quote
  #3  
Old 11-27-2012, 08:53 AM
msdtech1955's Avatar
msdtech1955 msdtech1955 is offline
Senior Member
 
Join Date: Jan 2008
Posts: 9,016
Default

bump to the top
Reply With Quote
  #4  
Old 12-03-2012, 07:01 AM
msdtech1955's Avatar
msdtech1955 msdtech1955 is offline
Senior Member
 
Join Date: Jan 2008
Posts: 9,016
Default

bump to the top
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
2011 MSD Performance