MSD6aL with DUI

[65coupe]

Hi,

I would like to seek help and recommendation about my plan to hook up MSD6aL to my DUI(Davis Unified Ignition) HEI dizzy. Any schematics/wiring diagram i can refer to? Is it advisable to pair these two?

The DUI installation is pretty much straight forward based on the document. The method requires running a 12 gauge wire from the ignition switch to the "BATT" terminal in the distributor. But im not sure how to hook this up with MSD6 box. Been hearing a lot about the MSD and the multiple spark sounds promising. So i really wanted to find out if I can connect the two.

Appreciate your help. Thanks in advance.

[65coupe]

I am upgrading my 65 six's stock load-o-matic dizzy with the DUI. Eliminating the points and the coil.

Shall i keep the stock dizzy and hook up with new MSD2 blaster together with the MSD6 box OR use the DUI + MSD6?

[msdtech1955]

I would like to seek help and recommendation about my plan to hook up MSD6aL to my DUI(Davis Unified Ignition) HEI dizzy

gm hei Distributor -four pin module install.

4-pin hei.jpg

[msdtech1955]

I am upgrading my 65 six's stock load-o-matic dizzy with the DUI. Eliminating the points and the coil.

Shall i keep the stock dizzy and hook up with new MSD2 blaster together with the MSD6 box OR use the DUI + MSD6?

points-6series.jpg

http://www.msdignition.com/product.a...005&terms=6201
http://www.msdignition.com/product.a...055&terms=8222