MSD Tech Support Forums

Go Back   MSD Tech Support Forums > Nitrous Diagram Help

Nitrous Diagram Help Collection of Nitrous diagrams for different setups.

Reply
 
Thread Tools
  #1  
Old 09-10-2012, 09:52 AM
Sbc70 Sbc70 is offline
Junior Member
 
Join Date: Sep 2012
Posts: 4
Default Diagram for 7al-3 two stages and brake

I was wondering if you could help me with a diagram for the 7al-3 using a Trans brake, two stages (nos big shot and sportsman fogger) using the retard functions also. I am using the Bosch 5 pin relays for the interrupt relay and solenoids. No timer or controller. second stage on push button on the wheel.
Thanks for the help.
Reply With Quote
  #2  
Old 09-10-2012, 01:55 PM
msdtech1955's Avatar
msdtech1955 msdtech1955 is offline
Senior Member
 
Join Date: Jan 2008
Posts: 9,078
Default

part one and two.

7al-3 nitrous..jpg

second stage nitrous-forum.JPG
Reply With Quote
  #3  
Old 09-10-2012, 06:26 PM
Sbc70 Sbc70 is offline
Junior Member
 
Join Date: Sep 2012
Posts: 4
Default

I may have forgot to add one thing. On my ARC box it has nitrous switches for arming etc. would the arm switch on my box be the "switch you are referring to in your diagram for the first stage. The switch on the arc box is already supplied with 12v. I was not to clear on this, I was not planning on using the RAS either, just having the first unit engage after the Trans break is released. Sorry for the confusion. Thanks again.
Reply With Quote
  #4  
Old 09-11-2012, 09:40 AM
msdtech1955's Avatar
msdtech1955 msdtech1955 is offline
Senior Member
 
Join Date: Jan 2008
Posts: 9,078
Default

version 2 without the r.a.s. ..........

forum version 2.JPG
Reply With Quote
  #5  
Old 09-12-2012, 09:50 AM
Sbc70 Sbc70 is offline
Junior Member
 
Join Date: Sep 2012
Posts: 4
Default

If you could help me with the switch you have on the diagram, would the "arm" wire on my arc box replace the switch you have designated on the relay? The wire on the arc box is supplied with 12v through the box. Thanks.
Reply With Quote
  #6  
Old 09-12-2012, 11:11 AM
msdtech1955's Avatar
msdtech1955 msdtech1955 is offline
Senior Member
 
Join Date: Jan 2008
Posts: 9,078
Default

as long as you have a way of turning it on and off ,,then yes that would work..

do any of the nitrous companies post drawings?
Reply With Quote
  #7  
Old 09-12-2012, 12:09 PM
Sbc70 Sbc70 is offline
Junior Member
 
Join Date: Sep 2012
Posts: 4
Default

Most I have seen have a controller in with it. I have one out of a magazine but the interupt relays are wired different from yours.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
2011 MSD Performance