MSD Tech Support Forums

Go Back   MSD Tech Support Forums > MSD Powersports Forums > Powersports Trouble-Shooting

Powersports Trouble-Shooting Diagnose your powersports ignition

Reply
 
Thread Tools
  #1  
Old 08-07-2012, 06:05 AM
zenawarrior zenawarrior is offline
Junior Member
 
Join Date: Jul 2012
Location: Brisbane Australia
Posts: 2
Default What do I need to buy

I want to use the 4217 - Universal 1Cyl, Programmable Ignition on a OHV Briggs, so what do I need to buy from MSD, and because I have to use a batteri to power the unit I need to know how much amps it uses.
Tanks
Reply With Quote
  #2  
Old 08-08-2012, 09:06 AM
msdpowersports1's Avatar
msdpowersports1 msdpowersports1 is offline
Moderator
 
Join Date: Feb 2005
Posts: 275
Default

The part you will need purchase in order to use the single cylinder 4217 ignition a are pn4154 Hall Effects pick up, pn 8232 single tower coil, pn 31019 8.5mm spark plug wire and pn 4309 rare earth magnets. The voltage requirements are min of 9.2 volts max 15 volts and minimum current requirement is 2.2 amps. If you have any other questions please email me at rcorral@msdpowersports.com

Thank you
Ray C.
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
2011 MSD Performance