digital 6 plus, 2 step limiter help

[joe little]

Hi, could anyone advise me if what i would like to do is possible.

At the moment i have my max rev limit set to 8500rpm but i shift at 8100 rpm as power after this is dropping off.

Can i set up the 2nd step limiter via a switch on the clutch pedal to activate the 2nd step when the clutch is depressed to 8200rpm so i could effectively use it for flat shifting without having to rev the engine to the max limit?

hope this makes sense and any help would be greatly appreciated

Many thanks Joe

[joe little]

Can anyone help me out on this?

Thanks Joe

[msdtech1955]

so,....you want to hook up the launch side to 8200 (when the clutch is in ) and the high limit to 8500 ?

[joe little]

Originally Posted by msdtech1955

so,....you want to hook up the launch side to 8200 (when the clutch is in ) and the high limit to 8500 ?

If its possible thats what id like to do.

So when i change gear at 8000rpm i can keep my foot flat on the accelerator and when the clutch pedal is depressed the engine will turn max revs of 8200.

Thanks for the reply

Joe

[msdtech1955]

that would work..( micro switch on clutch ) as long as you did not engage the clutch ...al the way to the floor.