blaster 2 on 91 mazda b2600i

[supratreo]

hi, i was wondering if a blaster 2 coil would replace the stock coil in my b2600i. it has a 2 pin connector which i would cut off and install ring terminals but is this coil compatible with this motor/ignition?

thank you.

if you need more information please let me know.

[msdtech1955]

yes, it would work as a stock replacement.

[supratreo]

thank you very much. looks like i have something to do this weekend.

[supratreo]

also, i don't have a wiring diagram. could i just use a test light to find what wire is what?

[msdtech1955]

what year and make ,so i can look it up on mitchell

[supratreo]

its a 91 mazda b2600i.
thank you.

[msdtech1955]

black-white is coil positive

yel-blue is coil negative,

[supratreo]

thank you very much.

[supratreo]

ok so today i went to install it so i took it out of the packaging and noticed oil on my hands. looked at the coil and the outside was covered in oil. because of this i passed on installing it until i find out if its ok. the coil has been sitting on its side in the packaging in my truck for about 2 weeks. is the coil ok? is this normal?

thanks

[supratreo]

and one more thing. i have a black/white wire and a solid white. no yellow/blue :/