|
|
|||||||
| Installation Questions Wiring diagrams and tech notes for powersport applications |
 |
|
|
Thread Tools |
|
#1
12-18-2010, 08:34 PM
|
|||
|
|||
Coil Wiring
Hey all, having some troubles wiring the coils with the mc4 ignition.
I am using 4 pro coils, part number 8232, for use on a single plug head, gsx based turbo bike. If someone could supply a wiring diagram on how to wire this it would be great. At the moment the way i have it wired is not correct, using the msd ignition tester the spark will cut out at 5500 rpm if the limiter is set at 11000,will only go to half of whatever i set the limiter at, the dial window on the laptop shows the rpm going to 11000 but the tester proves it wrong Look foward to getting this right 
|
|
#3
01-11-2011, 11:20 AM
|
||||
|
||||
|
Sorry for the delay in getting back to you. We are going to have to do a little research on using the 8232 coils with the MC4. There are two coils we use with the MC4 ignition part numbers 4253 and 8204 which are twin tower coils. Can you please email me your contact info so I can get back to you?
rcorral@msdpowersprots.com Thank you Ray
|
|
| Bookmarks |
| Thread Tools | |
|
|
