Originally Posted by henk
here are a few pictures of my MSD set up.
this is in the back of my car.
normally are all the connections packed in shrink isolation but i took it it of now to see if i could find anything.
the green/purple and coil cabel are going tru different holes to the distributor.
is there an explination why i have spark with the paper clip method and don't have spark when i ground the white cabel?
and if a box gets broken is then most of the time comlete broken or is it possible that it has a bad connection inside.
and anything strange to see on the pic's.
or any idea's or answers please?