View Single Post
  #3  
Old 09-10-2012, 05:26 PM
Sbc70 Sbc70 is offline
Junior Member
 
Join Date: Sep 2012
Posts: 4
Default

I may have forgot to add one thing. On my ARC box it has nitrous switches for arming etc. would the arm switch on my box be the "switch you are referring to in your diagram for the first stage. The switch on the arc box is already supplied with 12v. I was not to clear on this, I was not planning on using the RAS either, just having the first unit engage after the Trans break is released. Sorry for the confusion. Thanks again.
Reply With Quote