MSD Tech Support Forums

MSD Tech Support Forums (http://www.msdignition.com/forum/index.php)
-   Installation Questions (http://www.msdignition.com/forum/forumdisplay.php?f=18)
-   -   Digital shift light 8963 (http://www.msdignition.com/forum/showthread.php?t=18621)

hotparts 10-07-2012 04:26 AM

Digital shift light 8963
 
Hi guys,

i use this shiftlight in my blown LS2 and need to adjust it correct.
At about 1100rpm it reads 810 at the shift light. I`m to stupid to adjust it. Please could you tell me how to correct the reading and how to set the shift light to flash at 6500 rpm

Thank you

steve:thumbup1:

Gaz64 10-07-2012 04:57 AM

Steve,

Read your instructions, you are not set for an 8 cylinder.

The shift light rpm point is also a programming adjustment.

hotparts 10-07-2012 06:15 AM

Gary please explain it to me, i didn`t check it.

Thank you

hotparts 10-09-2012 01:12 AM

Nobody here to help me??

Thank you

Gaz64 10-09-2012 03:38 AM

Steve,

Is difficult for me to tell you how to do it.
One of the MSD techs should be able to walk you through it.

You have the device and the instructions are on the MSD website.

hotparts 10-09-2012 08:20 AM

I took the rpm signal out of the corvette c5 pcm, and it shows about 800 rpm less. Please could anybody tell me what to adjust. Or is it not possible with this rpm signal?

jimzilla 12-21-2013 02:16 PM

Funny stuff!


All times are GMT -6. The time now is 06:14 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
2011 MSD Performance