MSD Tech Support Forums - 7762 Boost Retard Module

Page 1 of 2

Show 40 post(s) from this thread on one page

MSD Tech Support Forums (http://www.msdignition.com/forum/index.php)

- Bench Racing (http://www.msdignition.com/forum/forumdisplay.php?f=9)

- - 7762 Boost Retard Module (http://www.msdignition.com/forum/showthread.php?t=18389)

msdtech1955

08-10-2012 08:13 AM

7762 boost retard module

a screen shot :http://www.msdignition.com/pr/map.bmp

msdtech1955

08-16-2012 10:59 AM

1 Attachment(s)

the first draft on the instructions......

Attachment 2336

procharged67

08-18-2012 10:35 AM

very cool were waiting ,,,:tongue_smilie:

msdtech1955

08-27-2012 07:27 AM

1 Attachment(s)

bump to the top
Attachment 2362
Boost Retard Module

msdtech1955

08-29-2012 07:20 AM

bump to the top again

msdtech1955

11-28-2012 06:47 AM

and again to the top

msdtech1955

12-03-2012 07:53 AM

and again .

msdtech1955

12-07-2012 07:08 AM

instructions:.....posted soon.

Gaz64

12-07-2012 02:25 PM

Quote:

Originally Posted by msdtech1955 (Post 76227)

the first draft on the instructions......

Attachment 2336

After reading your draft, I have noticed under the Wiring heading, loose wire of orange states "will sync 2A of current to ground".

The wording should be "sink" as in heatsink, opposite to "source"; not "sync", (short for synchronize).

Otherwise, well written and presented as always.

msdtech1955

01-11-2013 07:21 AM

IN STOCK.:thumbup1:

All times are GMT -6. The time now is 05:49 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page