MSD Tech Support Forums

MSD Tech Support Forums (http://www.msdignition.com/forum/index.php)
-   Powersports Trouble-Shooting (http://www.msdignition.com/forum/forumdisplay.php?f=17)
-   -   What do I need to buy (http://www.msdignition.com/forum/showthread.php?t=18279)

zenawarrior 08-07-2012 06:05 AM

What do I need to buy
 
I want to use the 4217 - Universal 1Cyl, Programmable Ignition on a OHV Briggs, so what do I need to buy from MSD, and because I have to use a batteri to power the unit I need to know how much amps it uses.
Tanks

msdpowersports1 08-08-2012 09:06 AM

The part you will need purchase in order to use the single cylinder 4217 ignition a are pn4154 Hall Effects pick up, pn 8232 single tower coil, pn 31019 8.5mm spark plug wire and pn 4309 rare earth magnets. The voltage requirements are min of 9.2 volts max 15 volts and minimum current requirement is 2.2 amps. If you have any other questions please email me at rcorral@msdpowersports.com

Thank you
Ray C.


All times are GMT -6. The time now is 10:46 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
2011 MSD Performance