PDA

View Full Version : 7531 box and Pro Data, and Windows Vista


EvilB1Dart
07-19-2007, 05:55 PM
Are there any idiosyncrasies/issues I need to know about regarding Windows Vista and the 7531 box and the Pro Data Software? If so, what are they and have they been resolved to work with the newest Pro Data software? Will it work with the old Pro Data software.

What about the USB to serial port cable?

Thanks.

Wes

this guy jeff
07-19-2007, 07:29 PM
dont know about the software but the adapter MSD recomends work great.



http://www.iogear.com/ part #http://www.iogear.com/main.php?loc=product&Item=GUC232A

Eric David Bru
07-19-2007, 07:47 PM
dont know about the software but the adapter MSD recomends work great.

http://www.iogear.com/ part #http://www.iogear.com/main.php?loc=product&Item=GUC232A

I don't have Vista, but this adapter works great for on my laptop.

EDB

msdtech22
07-20-2007, 08:31 AM
We have had some issues with Vista which are Micro-soft issues attached with Vista. These issues have been addressed by us, fixed and are available in the latest version of the GraphView software available 'on-line'.

http://www.msdignition.com/1softdownload.htm

Download the latest version on a computer so you can transfer/burn the program to a CD (a floppy is too small and will not work). Then use the disk that you have 'burned' to load into your laptop.

If your USB converter drivers were installed after you installed the GraphView; you will need to uninstall the MSD software and the software for the converter, then re-install the converter drivers first and then the GraphView second.