PDA

View Full Version : Eliminating Ping


valiant
07-16-2003, 10:59 AM
I have an Australian-made 1972 Chrysler VH Charger with a V8-340 and Chrysler Electronic ignition. Can you suggest which MSD product(s) I could use to eliminate a pinging problem? Thanks.

msdtech2
07-16-2003, 11:49 AM
If you are looking for a timing control that will retard timing when it starts pinging automatically, we do not have a unit.
But we do offer a timing control that can retard timing manually through a control knob. This unit is a PN 8782, this will connect to the factory module and you will have control of 15 degrees of retard by a control knob that gets mounted on the dash board.
Thanks,
msdtech2

valiant
07-16-2003, 12:41 PM
Thank you very much for the information. Can PN 8782 be used with Engine Knock Alert PN 8964?

msdtech2
07-16-2003, 01:38 PM
They can both be installed, the engine knock alert will let you know when the engine is pinging, so you can manually retard the timing at that point. You cannot combine them together to retard automatically.
Thanks,
msdtech2