PDA

View Full Version : water injection (pn 4259)solenoid


modblaster
03-03-2007, 06:28 PM
hi, i have watercraft with twin pipes psi !
i want install two solenoid! one each by pipe
can i use two solenoid with msd water pn 4259?
or just install one solenoid with split fitting for inject under each pipe!
sorry i try my english!

msdpowersports1
03-07-2007, 10:04 AM
You can use two water solenoids part number 4340 with one water injections unit part number 4259. Just run the two activation wires to both of the solenoids.

Thank you

modblaster
03-07-2007, 05:27 PM
where buy ? the two activation wires to both of the solenoids.
can you sales them?:confused1:

msdpowersports1
03-09-2007, 12:10 PM
If your looking to buy the 4340 solenoids give a call at 888-258-3835 so we can get them ordered for you.

Thank you
MSD Powersports 1

modblaster
05-08-2007, 06:48 PM
okay, my installation is final! after! i just have led red open! led green is closed! why! star my engine (3000rpm) and my led green is closed?brand new solenoid!

msdpowersports1
05-11-2007, 09:01 AM
When the enigne is runnig is the green light pulsing? if not there is a good chance you are not getting a trigger signal. Check the white wire you connected to the spark plug wire.

Thank you
MSD Powersports