PDA

View Full Version : 9.2 Deck 351 Svo Block


358SVO
10-20-2003, 08:06 PM
What distributors will work with the above block with a Edelbrock #2961? Can I run the standard diameter(red cap) billet unit or will I need a small diameter(blk. cap) piece? I guess I just need to know if #8578,8584,or 85805 is needed specifically.

msdtech4
10-21-2003, 11:21 AM
358SVO,

From the appearance of the intake all three will clear with out any issues. the only time we had a problem was with the Victor Jr. and the water cross over. The 8584 and the 85805 have the same cap and the 8578 has the new small diameter red MSD cap on it. If clearance may be a concern (due to EFI fuel rails etc.) I would go with the small diameter and be safe.

Thanks,

MSD tech4