PDA

View Full Version : Entire Setup


gabe042
10-16-2003, 10:19 AM
I have a 1964 Ford Galaxie 500XL with a 390 ci engine. It's a good street rod but I want to replace my entire elctic system. I'm clueless about what would be the best application. I need to know what the best coil, ignition, and distributer would be for my car

msdtech4
10-16-2003, 03:20 PM
gabe042,

The ignition box I would recommend is the 6AL part number 6420. This is a good all around ignition box and recommended for application from 13.5:1 and below. If you don't mind using a not cylindrical type coil I would recommend the Blaster SS part number 8207. This is a very efficient little coil and will be a nice plus to the 6AL box. The distributor I would recommend is the 8594 which is out pro-billet FE distributor. This has a fully adjustable mechanical advance so you can tailor the curve to suit the motors needs. This will be a nice set up for your 390. These will be available through one of our dealers listed on our web page.

Thanks,

MSD tech4