PDA

View Full Version : Basic 7530T programming


Stroked-Z
07-22-2006, 10:24 PM
Hi all....i have a new setup almost ready to fire & have some basic questions...

I bought a 7530T & would like to use only 1 curve for all 3 gears for now

What would be the easiest way to do this?

Also....how is everyone activating their gear retard curves anyhow?

mrbadass
07-25-2006, 12:59 PM
You should be able to use the "Run" Curve to set your main timing curve- you could tailor it so when you hit 3000 rpm you pull timing and pull more timing the higher it gets on the rpm.