View Full Version : Need Help
10-12-2003, 10:05 AM
I need to install an msd6a on a 1992 mustang gt 5.0. I also have the timimg retard knob. All were originally installed on the car but done very ugly and messy. I took everything off and now do not remember how to re wire it. Can you help?
Dazed and confused! :(
10-13-2003, 12:03 PM
E-mail me a fax number or mailing address and I will send you the diagram. My address is firstname.lastname@example.org Please list the part numbers of the units you have and what vehicle this is going to be installed on in your e-mail.
10-13-2003, 01:58 PM
Thanks, I did it over the weekend, trial an error and now it works fine. I also have a 1998 Maxima SE, currently I have exhaust, intake and plan on installing NOS 75 shot. I have a brand new MSD DIS-2 PART # 6211 DIGITAL-6 PLUS. I also have a tach adapter part # 8912. Can I use this? If so can you email me the instructions to email@example.com or fax them to 305-256-1288.
10-13-2003, 06:02 PM
Unfortunately the Nissan has individual coils, and they have a built in transistor in them, you will not be able to install the MSD Unit to your application. This can damage the coil/transistor and will not fire in the factory ignition.
vBulletin® v3.8.7, Copyright ©2000-2015, vBulletin Solutions, Inc.