PDA

View Full Version : Distributor For Olds 455


72w29
10-03-2003, 02:23 PM
Does MSD make a distributor that will fit behind an Edelbrock O4B intake manifold on an Oldsmobile 455? The old stock points-type (with a Pertronix Ignitor inside) rubbed up against the intake runner so i had to go back to the stock intake. Is there an MSD with a smaller cap than the stock unit? Also, this isn't a race car, but stronger than when new.

Thanks

Joe

msdtech4
10-08-2003, 05:31 PM
Joe,

Unfortunately if the stock point distributor did not clear ours will not clear either. Our distributor base is physically the same size as the stock points set up.

Thanks,

MSD tech4