View Full Version : 96 S10 2.2l
09-26-2003, 11:10 AM
I have an MSD 6A unit, secondhand, and I have been unable to locate MSD plug wires on your site for my pickup (96 S10 LS 2.2l). Do you carry them, or is there another manufacturer you could refer me to.
Just to verify, regarding installation, the "Harness PN 8877" will work to fit the ignition in my 96 S10 LS 2.2l correct?
Thankyou in advance,
09-29-2003, 04:58 PM
We are currently working on a wire set for the Chevy 2.2L engine, but will be sometime before they are in stock. If you need to get some at this point you can use the PN 31159, this is a universal set, which will work once you crimp the plug end, they are also supplied with a mini crimper.
The PN 6200 or the PN 8877 will not work for your application, these units are for engines with a distributor.
09-30-2003, 12:31 PM
I have a question regarding a blaster2 coil on the 96 S10 2.2l. I was informed I have coil packs in my ignition system, and this would make it impossible to have an external coil. I was wanting to replace my OEM components. Is there an application through your company?
MSD 6A, PN 6200
"Harness PN 8877" - Late Model GM to MSD Harness
"Universal Plug Wire Set PN 31159" - 8.5mm Super Conductor Spark Plug Wire Universal Kit
10-03-2003, 01:12 PM
I apologize, I made an error, your application is indeed distributorless ignition, which has coil packs. The MSD 6A or the PN 8877 will not work.
The following are the items that will work for your application,
PN 6211 Dis-2
PN 8870 Interface Adapters (They go between your coil and module and 2 required)
PN 8224 MSD GM Dual Output Coil (2 Required)
The universal wire set will still work.
P.S. I will correct the previous post and apply the correct response.
10-05-2003, 08:01 PM
I appreciate you getting back to me on that, thanks again. Then I guess I have a 6A to sell...it was used anyways.
10-07-2003, 08:24 AM
Sure no problem.
vBulletin® v3.8.7, Copyright ©2000-2015, vBulletin Solutions, Inc.