PDA

View Full Version : Entire Igniton Upgrade


dnylrq
09-19-2003, 06:00 PM
I have a 1996 RAV4 and I'm looking to upgrade all ignition parts that I can. I am looking to find out what my options are and what parts I need.

msdtech2
09-23-2003, 10:04 AM
Unfortunately we do not offer any cap rotor or wires for your application, although you will be able to adapt a MSD Unit, like a PN 6300 MSD SCI or PN 6320, SCI w/rev limiter. The advantage with an MSD Unit is that it will provide a better spark energy, for better throttle response and fuel economy.
Thanks,
msdtech2

dnylrq
12-06-2003, 12:37 PM
Ok, I see that I can use this ignition. How about an igntion coil? Like the blaster coil. or possibly a configuration of the MSD 6AL with the Blaster HVC coil? would that work? By the way this model engine is the same as the 97 RAV4.

mensajero
12-08-2003, 08:57 AM
Whats up :) . Small world isn't it. I'm just looking for the Coil.

dnylrq
12-08-2003, 03:58 PM
my, my mensajero, are you following me? :) yes, the coil is definitely the issue here. You wouldn't be trying to beat the rookie to the ignition system would you? :p Anyway, it would be nice to get an answer from these folks, eh?

MSDTECH8
12-09-2003, 12:27 PM
Dnylrq

On your 1996 Toyota Rav 4 2.0L 4 Cyl your ignition coil is inside your distributor. This makes it quite difficult to adapt an aftermarket ignition coil. We currently do not offer any coil upgrades for your application.

Thanx MSDTech8

dnylrq
12-09-2003, 07:59 PM
hey MSDTech, well, not to be rude, but man are you wrong. The ignition coil is external and is mounted on the firewall. I really would like to know where the heck you got that info. ???????? Anyway, could you please refer back to my question. Thanks a lot.

MSDTECH8
12-17-2003, 02:47 PM
dnylrq

I apologize for the wrong info. The information source that I have from Mitchell Repair Software shows internal coil. After looking further into the application and you are correct. My recommendation to you would be a PN 8207 Blaster SS Coil. You will need to replace the end on your coil wire with the supplied 90-degree boot and terminal.


Thanx MSDTech8