View Full Version : Ignition Wires And Tach Adapter
09-13-2003, 10:44 PM
I bought an MSD SCI Igntion PN:6300 for my 1990 Toyota Celica ST. Not knowing before-hand that you have to have special ignition wires. Now, I need to know if MSD will work with Vitek wires? Also, after reading this forum, I have discovered that I may need a tach adapter?
09-14-2003, 09:05 PM
If the they are spiral or helically wound suppression type wires then they should work ok. You most likely will need an MSD Tach/Fuel Adapter, PN 8910EIS.
09-16-2003, 09:19 PM
Viteck says they will work perfectly with MSD, so we should be fine, thanks, but i wrecked my car on sunday, so it will have to wait.
09-17-2003, 10:54 AM
Sorry about the wreck, hope you can get it running again soon.
09-30-2003, 10:08 PM
Okay, I'm getting my car back soon, but you don't sell the tach adapter on your website?
10-01-2003, 12:21 AM
Below is a link that you can locate an MSD dealer by looking at our Automotive Dealers page below.
10-01-2003, 10:46 PM
is this the tach adapter i need?:
and here is the link to Vitek, about their wires to double check:
10-03-2003, 11:23 AM
The adapter that you need is the PN 8910EIS, it will have additional wires to connect to the MSD Unit, we have seen the PN 8910 work on some occasions, but may not work on others. The PN 8910EIS has worked for all occasions for the fuel-injected Toyota's.
It seems that Viteck are suppressions wires, so they should work with the MSD.
10-06-2003, 09:52 PM
Okay, I've got all the parts coming in this week, and i want to have it intsalled and working by Friday night, got to show off. Can you send me a diagram for Toyotas and better info on hooking up the tach adapter. thanks for all you're help, this tech support board is great, answered all my questions, don't think i would have got a msd without it.
10-07-2003, 11:48 PM
Here is a link to the PN 8910EIS Tach Adapter Instructions that will show you the proper hookup of the unit.
I will post a diagram for you as soon as I have it convered to a .pdf format.
10-09-2003, 10:30 PM
I'd really appreciate a diagram for how to hook up the SCI ignition on a my Toyota Celica 4AFE engine, i believe i have an internal coil.
10-10-2003, 11:07 AM
Here is the diagram.
vBulletin® v3.8.7, Copyright ©2000-2014, vBulletin Solutions, Inc.