PDA

View Full Version : HELP! MSD not working 98 2.0 jetta


Lgprezes
09-06-2003, 09:14 AM
I bought the PN 6300sci and the blaster coil 2

the coil is not energized. what can be wrong

msdtech2
09-08-2003, 08:55 AM
Your coil has an igniter built with it, but you may be able to install the MSD unit to it. The connections are not to be made at the OE Connector that goes to the ECU and ignitor. The connection has to be made between the coil and igniter, there is a cover in front of the coil that covers the primary terminals, and this is where the connection has to be made from the MSD Unit. I have a diagram that has an MSD unit and using the factory coil, if you would like to see it let me know.
Thanks,
msdtech2