'67 Camaro L6-250

[gen1camaro]

I have a 1967 Camaro with a slightly modified straight six 250. Compression is 9.5:1, carb is Holley 500cfm 4bbl, stock Cam (I think ~224deg) but will go to 254 Hyd. Cam in near future. Headers into single 3" to dual tail exhuast through hi-flow glass pack. Auto-trans is 4spd 700R4 currently turning a 3.23 rear, which will be upgraded to a 7.5 in the near future. It has stock distro cap/points, and coil. It won't see time on the strip... this is a weekend driver to the shows and rallies. I've thought about TBI, but probably won't go that route any time soon.

Any suggestions for this 'ole car? Thanks!!!
aaron

[msdtech2]

Here are the following items that we offer for your application,
PN 6200 MSD 6A (or) PN 6420 MSD 6A-L w/limiter
PN 8202 Blaster 2 Coil
PN 8515 Pro Billet Distributor Chevy In-line 6 for 250cid
PN 31179 Universal Super Conductor Wire Set 6 Cylinders
Keep in mind that the distributor must be used with an MSD 6 Series Unit.
Thanks,
msdtech2