PDA

View Full Version : MSD 6A and Toy MR2


Manji
08-30-2003, 09:56 AM
Will be installing a MSD6A on 1990 Toyota MR2 NA. Which wiring diagram from the manual should be used? Also I am assuming I will need a Tach adapter, will I need the 8910 or the 8910-EIS?

Thanks in advance for any help.

msdtech1
08-30-2003, 10:51 PM
The MSD Tach Adapter you will need is the PN 8910EIS. Most of the Toyota applications will require this type of adapter. I do not have access to our factory diagrams right now, but if you can hold off until Tuesday I will post a diagram for you with all the factory wires indicated.

MSD Tech1

P.S. Thanks for posting the diagram for the Mallory Unilite hookup for the other member.

Manji
08-31-2003, 12:09 PM
Originally posted by msdtech1@Aug 30 2003, 08:51 PM
P.S. Thanks for posting the diagram for the Mallory Unilite hookup for the other member.
Hey, no problem thats whats cool about forums... :)


...and yeah, Tuesday would be fine - I will not be installing it until next weekend. Thanks for the help!

msdtech1
08-31-2003, 08:19 PM
I will make sure it is done for you first thing Tuesday morning.

MSD Tech1

http://msdignition.com/ToyotaMR2dia.jpg

dsmith1484
12-11-2004, 05:31 PM
Will this diagram also work for a first generation MR2 ? 1984-1989? It looks very similar but just want to make sure. If not can you post a diagram for the early model mr2's?

Respectfully


Dean

msdtechsupport1
12-13-2004, 10:21 AM
Yes, this diagram will work also. Just make sure that you know which posts on the coil are positive and negative. Other than that, everything else will be the same.

anant_ferrari
10-24-2005, 03:57 AM
dearsir,

We are connecting the SCI 6300, tach adapter, Blaster SS coil and plug wires.

Would the wiring diagram dispplayed above be suitable for a 1992 MR2?


If not, could you post the appropriate diagram for the MR2 2.0L turbo charged Coupe 1992 model.


regards,
Anant

msdtechsupport1
10-24-2005, 10:27 AM
Yes, you can use the same diagram. Double check the color codes on the coil.