PDA

View Full Version : 7531 Problems


cmyzfly447
06-05-2005, 09:42 PM
I am having aproblem when I reach my shift point, the car hesitates, kind of like it is at a revlimit or somrthing. my shift point is 8500. revlimit at 9500. I tried to shift at a lower rpm and still have the same problem. any suggestions? Also can't seem to get the data acq. to work correctly. It seems to record my burnout and not my run. Now it won't record at all. Any help would be appreciated. Thanks.

msdtechsupport1
06-07-2005, 12:05 PM
Are you using the RPM switch to activate the shifter solenoid? If so, make sure you use a relay to do so. As far as the data aquisition goes, it will start to record after voltage has been taken away from the dark blue wire. This is normally connected to the trans brake button or the line lock. If you have a foot brake car, you'll need to run some type of push-button to activate this circuit.