View Full Version : what kind of MSD ignition for a PASEO 5EFHE
08-23-2003, 04:46 AM
my car is an import with en rare engine The 5EFHe !!! in the states all PASEO are with the 5EFE
can someone help me??
can you tell me exactly what to buy ?? must i need an adapter ???
don't forget the 5EFE(paseo fisrt generation) looks like the 5EFHE engine of the Second Gen of paseo !!!
08-23-2003, 12:41 PM
Can you tell me what ignition System I should get for this CAR please???? will I also need tach adapter
08-23-2003, 06:50 PM
I will need to do a little research on your application and I do not have access to the oem wiring diagrams at this moment. I will not be able to get back to you on this until Monday the 25th.
08-25-2003, 12:26 PM
don't forget me
08-25-2003, 12:42 PM
I have done a little bit of research on your application, and I need to know if your engine uses a distributor with a single coil or is it a distributorles system with two dual tower coils on it. Please let me know.
08-25-2003, 08:47 PM
if you want i can give you a photo by mail....because i don't know ...
you can contact me at firstname.lastname@example.org
and i'll givve you the photoof my engine if you want
08-25-2003, 08:52 PM
i think it is distributor with a single coil ,because there is no two litle boxes below the valve cover ...
if you want i can give you a photo...because i am not sure ...
08-25-2003, 10:50 PM
A photo would be great, all you have to do is click on MSD Tech1 and then click on the email area and you can attach the photo. I will let you know as soon as I get it.
08-26-2003, 04:39 AM
i have found a foto
look at your Letter BOX !!! for the foto of the 5eFHE
08-26-2003, 11:05 AM
I received your photo and replied back to you. Let me know.
08-27-2003, 11:10 AM
look again at you letter box!!
for the new fotos !!
08-28-2003, 12:19 PM
i can confirm you that my 5eFHE engine has got the same distributor of the 5EFE TOYOTA PASEO first generation
08-29-2003, 11:01 AM
Let me know when you send me the photos of the distributor without the rotor or emi shield installed.
09-05-2003, 11:23 AM
i have found time to change the foto on the web site
please take a look a t your letter box
09-05-2003, 03:15 PM
Hello, got your photos, and by looking at the coil, there is a coil positive and coil negative and it even indicates on the coil. The following parts are available for your application,
PN 6300, MSD SCI (or) PN 6320, MSD SCI w/rev limiter
PN 8910EIS for the tach or fuel injection signal
The hook up will be at the coil, you will have to remove the original wires from the coil, and go through the MSD unit and then the wires from MSD Unit will go back to coil. If you decide to get the MSD units, let me know when you have them and I could give you a more detail installation.
09-07-2003, 02:49 AM
is it possible to get the SCI digital ???? does it works on my car ??,
09-08-2003, 10:16 AM
The SCI Digital, PN 6350 will work for your application. If the engine is fuel injected or has a factory tach, you will also need the PN 8910EIS Adapter.
vBulletin® v3.8.7, Copyright ©2000-2015, vBulletin Solutions, Inc.