Coil Application for a '96 Sunfire 2.2L

[Fastfire22]

Hello everybody,

I want to replace my stock coil packs with MSD performance ones, and I will be installing a MSD DIS-2 ignition system down the road when I install a turbo kit.

I would like to know what coil packs to use, and which ones will work best with the DIS-2 when I get it (and keep in mind I will be going turbo, so I will want the most powerful spark possible)

I was thinking these would do the trick, 2 of them : GM 2-Tower Coil Pack, PN 8224, what else do I need, blocks??

Also, any tips on how to install, if I need adapters or whatever, and wiring diagrams.

Some info on my cars stock ignition system:
-2.2L engine with DIS
-Primary resistance 0.35 to 1.50ohms
-Secondary resistence 5,000 to 10,000ohms
-Firing order 1-3-4-2
-Waste Spark spark distribution
-Cylinders paired with opposing cylinders, 1-4, 2-3
-2 coil packs, Ignition control module, etc...

[msdtech1]

The MSD GM DIS Coil, PN 8224 will work great with either your stock setup or the MSD DIS-2 Ignition. The coils will bolt directly inplace of your current coils and when you add the DIS-2 Ignition, PN 6212, then you will need to add the DIS Coil Interface Blocks, PN 8870 to make the installation real simple.

MSD Tech1

[Fastfire22]

Originally posted by msdtech1@Aug 23 2003, 12:03 AM
The MSD GM DIS Coil, PN 8224 will work great with either your stock setup or the MSD DIS-2 Ignition. The coils will bolt directly inplace of your current coils and when you add the DIS-2 Ignition, PN 6212, then you will need to add the DIS Coil Interface Blocks, PN 8870 to make the installation real simple.

MSD Tech1
AWESOME, thanks a lot!! :)

[msdtech1]

Your welcome.

MSD Tech1